Routers - Small Business

Hello, I have a Linksys E4500 as the main router and would like to use the WRVS4400N as a bridge to extend the range of my network and also attach a NAS to it.  Is this possible?  I've been trying different options but have been unsuccessful.  Can so...

I have 2 RV082's running the same firmware and having the same configurations.Running Dual WanThe second router (backup) refuses to get the IP address on wan 1 or wan 2.Additionally nothing shows up in the log. The port shows that it is up.If i use m...

Hi All,We've come across an issue whereby the WAN port fails to light up with an Adtran Total Access 832 (via bonded SHDSL) unit.Eventually the WAN port does light up after connecting and disconnecting it several times with the ethernet cable. Howeve...

Hi Everyone,I’ve been struggling with getting QoS to work on an RV180W router. My goal is to prioritize outbound RDP traffic over everything else. Here is what I’ve done in the configuration:Create a custom service: RDP (TCP 3389)Enable WAN QoS under...

Hi, I'm new here and I came because of an odd problem I'ma having problems troubleshooting.Here is the setup. I have two sites connected using two RV042 on SDSL connection. From one site, someone access to the other using a third party light client s...

This is driving me insane today.I have setup two sites connected by a nailed up vpn between two SRP547w routers.   This has worked for weeks however today the VPN is down and I cannot bring it up.I have looked in the logs of both routers and one site...

Hi.Is there a new software version that supports full ipv6 for wan and lan?  What may be the replacement for rv016 that supports full ipv6 and may have a density of 8-16 10/1000 ports?

Hi,is it possible to have 2 IP adresses on wan and setup specific routing rules for each IP ?or do I need to use another router for that and if wich one ?Thanks

Hereby I give a small screenshot of my log, could you maybe give an explanation how to read these refused connection policies and what means ppp2 ?

I have the followint setup:VLAN1 = 10.1.10.1VLAN2 = 10.1.11.1Inter WLAN routing is enabled on both VLANSI have VPN PPTP set to 10.1.10.50-60When I connect the VPN I get an IP address of 10.1.10.55I can ping the 10.1.10.x networki cannot ping anything...

Hi,i tried to set my x3000 (firmware 1.0.03) to wake up on internet my pc. This is my configuration:IP lan 192.168.1.10 (fixed on pc and reserved in DHCP)Firewall: forward port 9 from WAN to LAN IPI can't set broadcast IP (192.168.1.255) from web int...

Hi! I bought a RV110W yesterday to create a simple wireless connection with VPN capability. I followed the starting guide and completed the physical connection of the modem. Now I have LAN and wireless internet connection. I come to the VPN tab, enab...

Hello.I have a question with using QuickVPN with RVS4000 router. I have a info message "The remote gateway is not responding."when I trying to connect using QuickVPN and VPN client. Although,when I see VPN Clients Status in RVS4000's configuration s...