Routers - Small Business

Hi thereI have just received an RV120W.Default setup (out of box), but when I http://192.168.1.1 and login, the next page comes up as :Internet Explorer cannot display the webpage ?Internet Explorer is version 9.I have allowed both http and https at ...

Hello everyone!  Re above router - I can connect to the VPN as per configuration instructions but cannot see the server or access the server shares. If on the other hand, I turn off the VPN and I set up the same server as a DMZ as per instructions, I...

Need a product recommendation.Project: Three LAN locations connected by Internet VPN transporting multicast VOIP.Application: A highway worker s portable radio talks into a radio receiver at location 1; the radios at locations 2 and 3 both transmit h...

Hi all, I'm having problems with my VPN, the tunnel is up but I can not get to the far end, when I trace to an IP address at the far end it times out after it his my VLAN interface on my Switch.Configurations are as follows:RVS4000Local Group Setup  ...

HelloWe run several RV016 and 82 behind DSL lines with dynamic IPsWe have found that the DynDNS client running on tha latest firmware, is only updating the resolution of the host/IP when the field is saved, or the unit is rebooted.If the DLS line dro...

Hi,I am replacing an ancient SOHO 90 series router with our new RV016, I was told this thing would do everything we needed which I didn't doubt, however, I am wondering if I made the wrong choice now.  We have 5 IP's on one line coming into the curre...

Hi,On SMB 300 series I noticed that the PoE power budget (24ports) is 180W.So if calculate well, I can only use 7,5W / port (if all ports are used). Does someone has experience with this low budget switch?Is the deliverd power stable to use 24 phones...

RV082 - 1.3.2 (Yes, I know this is old firmware)I need to have RDP and pcAnywhere enabled to a customer site for remote support, but need to limit the incoming IP ranges to only our offices. I have the port forwarding set up and tested working. I the...

Hello,I configured outbout access rules to allow outbound traffic only during certain hours (say 9:00 AM - 6:00 PM for instance). When 6 PM is reached, new outbound connexion fail as expected, but sessions initiated before 6 PM remains open I would ...

HiI just bought Cisco RV220W router, and i have some problems connecting VLANs.I have 2 vlans on my network. Now i would like to leave those 2 vlans seperate, so that nobody can go from one vlan to another.But i want 3 exceptions. 1.) access from VLA...

I'm currently experiencing problems where my router just reboots.I've tried with 4 different routers so far, 2 of them being the WRV210, a 861W and a cheap unknown brand router that was lying around in my basement.All of them do the same thing: start...

Hi.  I am seeking advice on how to configure our network for best performance.Background is that I have just joined a group of non-techie workers in a 4k sq ft office, there are currently only 3 other people here.  We "inherited" an existing network ...

Hello!I want to use a RV042 VPN Router within my network. The clients can establish a VPN connection to the RV042 (they can ping the RV042 and access webgui) but can't get access to the Storage server.The network:<client1> ------- (VPN via QuickVPN) ...