Routers - Small Business

In at least F/W 1.0.2.4 and 1.0.3.5 I a have experienced an intermittent problem of the actual throughput WIFI speed dropping e.g from 8.5 Mbps (our WAN speed) to around 1.0 Mbps. (no neighbouring networks, clients only a few feets away, maximum radi...

hi there,i was connected to my rv042 via remote management / browser, and tried to add vpn clients. i generated a new certificate and then i clicked on export for clients. by doing this, the remote management disconnected and i cannot access the rout...

Hi all, I am currently configuring my new SRP546W on my network and I need to disable DHCP I dont want clashes with IP's from my current DHCP server on my network.Just wondered if somebody would be able to shed some light on my situation.Many Thanksj...

Hi,Can any one please tell me the OID for CPU and MEMORY utilization for wrv4400n? ThanksVipin

I just bought a WRVS4400N last week to replace my existing LinkSys WRH54G. To my disappointment, I now have a problem that this router halts everytime any eMule/P2P client is connected for more than 15~30 minutes, no matter the uPNP is enabled or not...

I have a RVS4000 that will not save any settings. Click on, for instance, Disable WAN requests. Click save and it goes back to Enable.If I create a VPN tunnel, click save, it clears all settings like I didn't type anything.What is going on?

Hello,I have WRV210-E V01 router and there is only 11 (instead of 13) WiFi channels available. Firmware 2.0.1.5. How to get all 13 channels (European ETSI standard)? Many thanks.Regards

Hi,WRV200 does not transmit packets in Router mode. This issue has been describes already here:https://supportforums.cisco.com/message/3099108WRV200 is supported until December 26, 2012 (http://www.cisco.com/en/US/prod/routers/ps9923/end_of_life_noti...

Hi - We have RV 042 deployed for internet access/firewall purposes. Due to growing number for Wireless devices and also to separate WLAN traffic from wired devices, we have created a separate VLAN/IP Subnet for the wifi devices. We are having trouble...

Is there anyway to associate a name to an IP in the RV220W?  I am coming from a WRVS4400N v2.  Folks are complaining that they can't connect, for example via Real VNC, via the PC name any longer.  They have to use the IP address.  In the past I put t...

i noticed that my network speed was very slow (connected wirelessly with N)i shut down the wireless and connected to my LAN i ran LAN Speed TestWLAN 27secLAN .15seci rebooted the router & times were <1sec, however a few minutes later it was slow agai...

I have an RV042 using Quick VPN to connect to a remote network. I have port 1723 forwarded to a static IP address on a Windows 7 Pro 64 bit PC. I can establish the VPN and ping a printer but not the Win 7 PC. I can not acccess any shares on the pc vi...

Hey,I have a RV220W with 1.0.3.5 Firmware installed.I also have a few servers with services I need to expose to outside the network (RDP and some websites) where the external port is not the same as the LAN port. I could accomplish this with my previ...