Routers - Small Business

Version:V2.0.0.3I have a RVS4000 set up in a public hot spot with DHCP set for:Starting IP Address: 192.168.69.100Maximum Number of DHCP Users: 100so 192.168.69.100 thru 200.I set the initial Client Lease Time: 120 minutes (0 means one day)I noticed ...

Good afternoon,I have the problem that my wireless is not seen door my computer.I see the networks from the street but not my own on my computer.With wire he works fine.I do not have changed the ssid in hidden.Can somebody help me?I have read the man...

Usually, I work with Cisco ASA 5500 and this time I try a WRVS4400N. Very easy to configure but twice after configuration, it resets itself !!! Unable to work with VPN Cisco client, I try Quickvpn but "remote gateway not responding" !!! Too easy to c...

I have an RV042 router configured to use Quick VPN by creating the clients on the router. The router has a Verizon gateway in bridge mode providing the internet access. I can connect using the Quick VPN but I can not access any of the computers on th...

hi guysI can not connect to PPTP VPN using iphone .... any ideas? Machines with Windows XP or 7, works correctly.thanks

Many users of RV042 report issue that router is always accesible at 192.168.1.1 even if there is another IP/network set (e.g. 192.168.5.5). I tried to find a reason of this strange behaviour and my conclusion is as follows (firmware 1.3.12.19-tm): Wh...

I'm trying to configure QoS on the WRV210 to have FTP traffic take preference over HTTP traffic, but it does not appear to be working.I've created two user-defined settings under Application-based QoS --> Bandwidth Allocation.  They both have the sou...

We have a situation that seems to have no resolution.The RVS4000 is being used as a hardware firewall and router in front of a Asterisk PBX system and its phones. The RVS4000 is downstream of a unmanaged switch which is also in front of a checkpoint ...

After approximatly 24 hours of operation on a VPN between a RV120W and an ASA5520 the RV120W fails to respond to the XAuth requests. I was able to capture the following logs in the RV:2011-04-01 07:08:02: [router20AAB6] [IKE] INFO:  Received attribut...

I bought a RV120W to replace an Netgear FVS336 that was a pile of junk.  Sales and web info states this is easy to set-up and use VPN concentrator, exactly what I was looking for.Purchased, updated to latest firmware (1.0.1.3), full factory reset to ...

It may sound like I'll be venting a little, but I have to express my on goinig and unpleasant experience with this router and tech support. As mentioned above in the subject line, I just received this new version 3 model yesterday afternoon, unpacked...

Hi,I was questioning if there was already some fix for the problem that ppl can't use portforwarding when disabling IPS.Now I have to enable IPS ( 20mbit on a 60mbit isp... ) to let port forwarding do his work, sorry but that's a bit poor for a 200$ ...

How do I reconfigure my WXT45G v3 router for my home? I lost internet last sunday. When I connect my ethernet cord from my modem to the router, nothing happens. When I connect the cord from my modem to my computer it is fine, but my ethernet cord is ...

Hello,We have been unable to simultanelously login more than one user (client) with QuickVPN from the same remote location (behind the same remote router).We require 3 users to remotely login using QuickVPN from a remote location.We can successfully ...

Does anyone have a clue to have WOL / Wake On Lan working through a Linksys RVL200 SSL router.I Allow UDP port 9 in the firewall but the magic packet is not broadcasted on my LAN. It's not possible to set up a forward to my lan broadcast adress as th...