Routers - Small Business

Hello.  I'm hoping I can some help.  The internet comes in from T1 via Cisco 1721 (leased by third party).  This in turn goes to a switch and then to my ftp server and the RV082 with the rest of the network behind the RV082.  Setting up the network w...

We recently purchased a Cisco(Linksys) RV082 to allow our patrons public internet access to our Time Warner Cable connection. For about 3 weeks the router performed great.Then all of a sudden, the router would restart itself when more than 5 people w...

Hi Everyone,I’m replacing a netopia firewall with the cisco RV120W. Here’s my question, on the netopia 3 pinholes are configured. What is the recommended port forward config to do the same thing on the cisco RV120?So lets say from WAN to LAN IP host ...

Struggling with SSL VPN on the SR520.  I've got this working just fine for PC clients.  However, CCA won't let me install MacOS and Linux packages.  After coming to the conclusion that CCA is a pile o' poo, I decided to nuke the config and go at it w...

Currently we have been having some problems with corrupted files coming out of our network, which is connected through an RV 120W router. Like the problems in this (https://supportforums.cisco.com/message/3193012#3193012) thread, the problem appears ...

     I have a RV042 connected VPN to a remote office with the router. It pings the server with no issues, but I cannot access remote desktop, server files and printer resources on the VPN. I have 2 other routers I use to connect to the remote locatio...

Howdy,I have an RVS4000 (hardware v1) with the 1.3.2.0 firmware and the IPS signature database from June 2010 (v1.42).  I have set the IPS to block SKYPE but can still access it on my network.  So I rebooted the router and it still doesn't seem to be...

I set up my RV042 with two ISPs, one charter internet and the other AT&T DSL.  My DSL modem all of a sudden shows a red light over the "internet" slotshowing that it's not working.  When I remove the modem and hook up to a PC, it works fine.  When I ...

I have a small network setup using:rvs4000 (firmware 2.0.0.3)sg100d-08wap4410n (firmware 2.0.2.1) - configured as APwap4410n (firmware 2.0.2.1) - configured as WDS repeaterWhen I started 3 simultaneous downloads from a Windows 7 machine connected wir...

Hi,Recently the web UI in  my wrvs4400N router becomes inaccessible. When the Ui becomes inaccessible the router  also loses wifi. The strange thingis that router response to pings and computers connected through hard wired still have internet.  I ha...

We have two RV042 configured for gateway to gateway VPN but cannot get any pings across. I have been doing these for years but something is wrong here.  The same RV042 here has a working VPN to another RV042.  The working one is No. 1 in the screen c...

Hi all,I have a question in regards to the 802.1Q intervlan feature on the WRVS4400N. My goal is to setup a test network with atleast 10 departmental VLAN(s). By reading the WRVS4400N's data sheet I know that it supports up to 4 VLAN(s). I decided to...

I have these ports like to block TCP 10001, TCP 36567, TCP 47611, UDP  28086 and UDP 28080, and would like to apply date & time schedule to these port as well.Can you please advise how to set them up in Cisco WRVS4400N.Thanks in advance