Routers - Small Business

Hi,I'm new user of a RVS4000 router and I would like use the VPN server to connect to my home network and have an access to printer, shared folder on computer and a Netgear ReadyNas.I'm a Mac OS user and I've found here how to configure IpSecuritas t...

    Our RV042 has cable modem in WAN1 and ADSL in WAN2; it is set in smart link backup mode.In certain cases of WAN1 signal loss, RV042 seems not to detect this condition. Consequently it does not switch automatically to WAN2.One way to get it to swi...

Has anyone been able to successfully setup AT&T DSL for a dynamic IP address?I've tried bridging the modem to the router, but the router never gets a valid public IP address (and cannot access the internet.) All logon information has been saved in th...

I recently switched ISPs and also swapped my older RVS4000 with a new one (same model). When configuring my new RVS4000, the LAN tab does not show the correct setting for my netmask. The drop down menu shows me several options including 255.255.255.0...

I recently installed a WAP2000 and connected it for the first time today and I can not access it from the web interface. The default according to the documentation is 192.168.1.245.  I can see the WAP but can't access it online to configure it.

I have a WRT310N and just bought a WAP4410N.  I have been trying to access the setup page for the WAP4410N using the web address of 192.168.1.245 but it is not letting me.  I have been ab le to connect twice to it but once I modify something in it, l...

I have Vonage Voip service. I'm using a Linksys RTP300 router. It connects to a Panasonic KX-TDA50 pbx system.  My problem is that the RTP300 adds a leading "1" to the caller id information and sends that info to the KX-TDA50. Unfortunately, the pbx ...

I have an existing internet connection at work:CDG24 cable modem in 'gateway' (their word) mode showing these configuration screen values:WAN IP 1.2.3.88  (not a typo)MASK 255.255.255.252GW 1.2.3.89Public IP  1.2.3.89/30DNS 209.18.47.61, 209.18.47.62...

I just set up my new rv 082 and am following the steps for registration.1. the link to register the product www.linksys.com/registration does not exist2. in the pulldown menu in the home products the model does not appear.3. there is no option to reg...

Hi,I would like to foward *::20 and  *:21 from one of my RV082 to a Second one.My configuration :Each RV082 is loadbalanced on each other. Sometime just one (receive the fowarded port)RV082 (1) -> manufactured in 2005- Firmware Version: 2.0.0.19-tm -...

Hi everyone,I got a RV016 with the lastest firmware. We are sharing our office with another business. For the moment we all got everything separate. But since we have two different ISP and both businesses rely on the internet for communication (VOIP)...

I have a RVS4000 router and have connected each of the users to the router via QuickVPN connections.We play the Age Of Empires III game fine when only 1 is connected via QuickVPN.Whenever I have more than 1 connected via QuickVPN, only the 1st user t...

I have a Cisco RV082 Dual WAN router with the latest (only available) firmware 2.0.0.19-tm.I have it set up in Smart Link Backup mode, the primary WAN1 connection is a 12/2mbit Cable connection (DHCP), while backup WAN2 is 6/1mbit DSL connection (PPP...

Hi,I have a problem with my RV042. It is connected with two VPN to a client and to an other site of my company.Sometimes, I can't connect to remote ressources or even ping the remote server behind the remote firewall and if i check the VPN status on ...