Routers - Small Business

I have a RVS4000 v1 Firmware Version: V1.3.1.0 and the past couple of days i have had to Reboot it a few times after a lose of internet connectivity.  I also had to reboot it because a VPN user was unable to establish a connection.  Each time Rebooti...

Hi,I have some issue to configure my RV042. I have 8 voip phones and 10 pcs on my network. I used DHCP to attribute IP between 192.168.1.10 and 192.168.1.20 to the phones and over .100 to the PC. I want my phone to have their own connexion. My switch...

How can we specify from the IOS CLI that all traffic going to/from Dialer0 is repeated on interface FastEthernet1 so we can monitor some problems that we are having?I have Googled but I could not find the command to use on the SR520.

Hi,I'm have a RV016 router running 3.0.0.19-tm firmware. I have enable PPTP server and is able to connect to the internal network with windows xp PPTP client.The problem is that now i need to limit the PPTP client to be able to access to certain PC a...

I seem to be having issues with download speeds / dropping remote connections with my RVS4000. I have not changed anything from default (that I remember). Downloads from various sites can take hours, if they complete at all. When I try to access my n...

Hello,I have a WRVS4400N that is setup as 10.1.0.1, it is setup to tunnel to a Cisco ASA and allow access to 10.1.5.0 from all 10.1.0.0 addresses.This works great.The problem is that when I use quickVPN to get into my WRVS4400N from my house, I canno...

I replaced an old router with a Linksys RV016 at a small office comprising about 15 computers and 15 VOIP Phones (using G729a requiring ~80kbps). I am hearing complaints about the following1) Incoming VOIP Quality is bad, Outgoing is fine.2) Download...

Can anyone point me in the right direction? Im trying to get my RV042 toact as a DNS server for my network. Is this possible? I don't seem to find any way to configure it as a DNS server...Since it's already handling DHCP, it would make sense to serv...

i am looking a quick vpn utility for windows 7

HelloI have a small problem. I'd like to see DVR Surveillance. The DVR is behind the VPN Client. Howto add static routing if i see it.192.168.10.100 See the DVR192.168.1.49 Gateway to the DVR192.168.1.50 DVRPls see the diagrammThanks

Hello,Looking for a bit of assistance prior to calling and starting a potential RMA proccess or returning the unit.I picked up a new WRVS4400N on Friday, 10/22, I proceeded to hook it up, set up two wireless networks(one with WPA2-Personal for 802.11...

Is it possible to configure wireless guest access using the built in AP of an SR520W-FE-K9 using CCA. If it is not possible to use CCA, can the CLI be used without breaking CCA functionality such as VPN configuration. Customer requires a firewall bet...

hiI just bought RVS4000 a week ago. My ISP is using 587 for smtp. It seems that RVS don't support port 587. Is that true?How should i overcome this issue? Thanks

Good morning,I  have a problem with two RV042, I connected all the fixed IP, I set the  two teams according to the manual, arrive to establish the connection  but can not see the teams that have the other site.Attaching images with the current config...