Routers - Small Business

Hi,I´m seeing this lines in the VPN Log of our RV082.My questions are:is if these are normal logs or if it could be an attack?is there any exploit for RV082 that I should be aware of?can I disable VPN completelly?I'm not expeting any client connectin...

I am looking for a little direction here as I am used to working with Cisco gear and have not played with Linksys very much.  I will be creating two seperate vlans on the SFE2000P and would like the RV042 to provide the routing capabilities for these...

I am experiencing difficulties in setting up a VPN between a SA520 router in a home office and a UC540 router in the central office.Since CCA can only configure the basic settings of the SA520, I used the SA520s web interface for VPN configuration us...

I upgraded my RVS4000 to 1.3.0.5 last month.  And now I want to upgrade to 1.3.1.0, but the browse button is disabled on the upgrade firmware page.  Is anybody else having this problem.When I look at the html source it clearly has disabled turned for...

Hi All,I am experiencing a very odd issue with an RVS4000 configured with a site to site vpn.(addresses changed)RVS400 config:Local Network: 192.168.200.xExternal (and endpoint) IP: 100.1.1.11Office Config:Local Network: 192.168.10.xExternal (and end...

I setup a user using Quick VPN. Once I figured out the IPSec problem which was due to a port forward issue,I was able to ping the server and map a drive to get to my files.  The user shows up as connected on the router side.However, the Verifying Net...

How can change some of the settings of RVS4000 (port forwarding or virtual server for example) without browser under linux. I would like to set new virtual server automatically, when I (some of the process) see that the current server is down. For ex...

Hello,I have bought the RV082 Router. Till today we use one WAN port and connect to DSL from T-Online here in Germany.Now there is a second T-Online connection in the office. In the past it was used from our partner, but now it's free.So it is possib...

Hello!I'm using the WRV200 Router (1.0.39) with an ADSL-Modem (Thomson) to connect to an Austrian ISP. So i have to use the PPTP-Connection to "dial in".When i'm using this setting DDNS-Update via dyndns.org fails. The Status always says "diasabled"....

I have about 12 carts that I take to various events that the several carts need to talk to each other (via wireless bridges via a private subnet) and access the internet.  At the same time, I need to connect to a data stream that is on a shared netwo...

I am using RV042 router with firmware  1.3.12.19-tm.I have two live IP address which I'd to assign to a two PCs on my LAN. When I setup one-to-one NAT the two machines become accessible from the internet. However no outbound traffic then works for th...

After updating firmware to 3.0.0.19 on our RV016 router the log file is showing an error about every 70 seconds.Event type: Authentication FailureMessage: 2010/02/24 17:20:34 Bad login attempt for user: (null)It doesn't seem to have any affect on the...

I have a scenario where I have a PBX (10.0.0.xxx) on the Lan of the router.Wan 1 has an internal address of my customers network 192.168.1.xxx and is connected to his switch, his mail server is on this local network @ (192.168.1.2).Wan 2 has a public...

I'm attempting to set up an IPSEC VPN connection between my RVS4000 at home and my Fortigate 200A at work.  I've verified all Phase 1 and Phase 2 settings and checked to make sure the shared key is identical on both units.  When I try to initiate a c...