Routing

Hello friends,we have a router 3945 with the following modules - Our idea is this - someone is calling a mobile number for example +3598212312 The person is connecting to the number but after that the number redirects the call to the Cisco 3945 then ...

Hi We have a setup CE Router (ASR1002) à L2 Swtich (3750) à Firewall (ASA 5540) à Core Switch (VSS 6509 – SUP2T). When OSPF falps because of BFD the BGP as well flaps extactly after some time. Is there any bug relating to this issue. Jun 20 03:03:34 ...

Hi              We are facing the issue with EIGRP flapping.. when we checked the interface the bandwidth utilization is going more than  alloted bandwidth.. But no one is transvering the traffice... We configured IPSec for packet encapsulation. Once...

Hi, I have a router rebooted and  show version shows its parity error.Is this software or hardware bug sh verCisco IOS Software, 3800 Software (C3845-SPSERVICESK9-M), Version 12.4(24)T8, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/t...

What is the main difference between unpacking the IOS file and installing it piece by piece versus just doing a consolidated upgrade?

I am currently running MERU AP 300 (Foundry) on Cisco 2960S Switches WS-C2960S-48FPD-L  12.2(55)SE3           C2960S-UNIVERSALK9-MWe are having an issue with sometimes the APs work and sometimes they don't and appear dead to the worldWhen they are no...

 we have 2 links which are heavily occupied while running windows updates on the newly built desktops/laptops. so i want to apply qos to restrict BW for downloads on internet links. else what is the best way to restrict the downloads? Thanks,Sridhar

Hey.. Got a really weird situation which is driving me crazy.  Please help2 Subnets - Vlan1- 192.168.100.0/24 , Vlan2 - 192.168.0.0/242 ISPS - Verizon,OptimumEmail server host 192.168.100.7 set through route-map policy to go out through Verizon.  Alw...

Image link (the image above looks distorted in the post preview):  http://fodder.s3.amazonaws.com/ospf-cost-diagram.jpgIn the test network shown in the diagram I have the following issue that I can't seem to figure out:Without any modification to osp...

Hi, Referring to the subject, U-Interface card has a built-in NT1 and uses a RJ49C connector. S/T-Interface card is used by connecting to an external NT1 and uses a RJ45 connector. Hence, just to confirm if I can use U-Interface card and connect to a...

Hi All,Per Cisco recomendation Iam planning to upgrade IOS on 7206VXR (NPE-G2). ************************************From 'sh Ver' :System image file is "disk2:c7200p-advsecurityk9-mz.124-4.XD3.bin"Sh bootflash: c7200p-kboot-mz.124-4.XD2.binshow bootv...