Routing

In our infrastructure we are using an ASA 5520 firewall.  We have static NAT setup to convert externally facing IPs to internal IPs that correspond with the VIPs on our loadbalancer.  We have the following 3 VIPs setup:- One for https://www.example.c...

This will sound errily similar to another post on this site. I'm also new to Cisco router configuring. We are trying to configue a 1921 to communicate to our local ISP's gateway and a private network. From the router we can ping the external dns serv...

Does anyone know if there are any issues with IOS 12.4(16) through 12.4(25f) with HTTP/HTTPS protocols running on a 3825 router? I have a remote site that accesses a corporate application over an MPLS, sometimes it works fine, other times it will han...

I'm having a brain fart here.I have a Router which is connected to a switch.The router has Ethernet0 and Ethernet1, both of which are connected to a switch.E0 and E1 are configured as routed ports !interface Ethernet0description Internet public vlan ...

Hi,i have configured shaping on a interface for 37.6Mbp, while the interface NOT congested and the traffic rate is no more then 5Mbps i'm getting a drop rate and the total drops queue counter is raising.  Class-map: class-default (match-any)      215...

Hi allCan anyone please briefly explain what these are? I know the attributes are like the metric, but what about the exteneded commnuites, what are they used for?and also I hear many things about the atrributes, what metrics does BGP use by default ...

I had the Cisco 877W Router working in my old company. The old company was closed and I bring all of network equirments to new company.I am trying to setup this router to new company but lost menu, console cable and software CD.What I did?1. Reset th...

Hi,I work for a company that is about to start a small ISP. The company is planning to buy STM1 bandwidth from two service providers and distribute it among potential customers. It has already proucred IPs and AS No. from APNIC and would be running B...

The ASR 1002 doesn't seem to be giving the same kind of QoS information that you can get off another series router.  ACL's tied class maps don't give hit counts, and the information from a "show policy map inter" is next to worthless.      Class-map:...

Hello,I posted this message to LAN forum and I didn't get a response. I supposed that the question is more related to WAN forum so I resend it. I'm new to dot1q-tunneling and I must select hardware to it. I have two very basic questions:-  Cisco Cata...

Hello Everyone,I am about to install a CISCO 2811 router for a point to point connectivity using the serial port.  Can someone take a look at it and see if there is anyhting I need to add or delete.  Thanks much.  It is going to be a T-1 connection. ...

We have a 21mbps connection to the Internet. This connection has several uses, not just for wireless internet access.The average internet speed tests I do for users not on the wireless on this connection range from 8mbps to 15mbps.As soon as I put a ...