Routing

All;I have some interesting output which I'm trying to wrap my head around while doing some troubleshooting to recover from lost network connectivity. I've included the snippet below of relevent output.All the reading I've done thus far indicates tha...

Hi,Imagine i see this:Port Speed:3072KQoS:PPS 768/512Encap:MLPPPQuestion:What is the effective QoS in this case; 768 or 512K?

I have a pair of 6509's with Sup720-10g's.  They are configured in a VSS cluster.  We are seeing some very strange EIGRP behavior.  When I do ashow ip eigrp neighborsH   Address                 Interface       Hold Uptime   SRTT   RTO  Q  Seq        ...

Hi Guys,I have a little bit of a problem, I have a ADSL and ESHDSL service being delivered to a client site and then using HSRP to ensure that ADSL is provided first and ESHDSL will take over after.The ESHDSL is dedicated for DVTIs to branch offices ...

I have been using the Cisco7613 and FlexWAN with PA-8E1-IMA PortAdapter. It has been used for ITP (SIGTRAN) Today, I attemted to enter the PorAdapter 13 1 module with using command that "attach" command. SG10#attach 13 1 But I couldn't that. and I c...

Hi,    my client, a service provider, wanted to purchase one Router which can support  around 6-8 STM Internet Bandwidth and further distributed to his customer P2P Links of atleast 50-100-200-300 MB each.Please suggest which kind of router (7200 or ...

Hello everybody, i would like to know how may memory i can upgrade, and what tyoe of memory use my router, thank you!!! Have a nice day

Hey guys,Putting in a 1Gbps private ethernet link between 2 sites. Currently have 2 2811's at each location, don't think that will cut it. I was going to get 2 2911's, but looking at the docs it looks like they can only do 180mbps of throughput? Am I...

Looking for assistance running IP SLA on a switch with Embedded Event Manager.Switch is a 3560 running IOS version 12.2(53)SE2 and has the below configuration applied , but I have also tried on a router running multiple IOS v12.4 versions.-----------...

HelloI have a packet tracer lab that we are working on in my NETW208 class.The lab requires us to cable to routers and a third router acting as a Frame-relay switch.The only Routers we have to choose from are the 1841, 2620xm, 2621xm, 2811 and two ge...

Hi,I have experienced that when I do a show ip bgp command in a public internet routeserver I only see one available path which is the best path for a specific block. Since I am doing multihoming with two ISPs I was expecting two paths incase best pa...

Hi there. I need a help to understand a real problem, or impact, caused by Output Drops on ATM subinterface. The ATM subinterface have a lot output queue drops reported (and is constantly incrementing), but this, apparently, don't caused any probl...