Routing

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

Hi,On the lower-right side of the back of a Cisco 1861 router,  there are two ports which I'm unsure about. On page 8 of the following  PDF, they are referred to as an "FE port" and a "LAN Uplink" port: http://www.cisco.com/en/US/prod/collateral/rout...

Hello and thanks to anyone who will answer this post. I have the situation with my new Cisco 2951 router. It has only one module on board - SM-D-ES3-48-P. I don't know what is wrong but I can't see any information about this module. When I connect my...

grinch182 by Level 1
  • 1504 Views
  • 3 replies
  • 0 Helpful votes

Hi guys,Need some opinion from you guys...I'm thinking of connecting a branch office to the main office with just using multilayer switch. The sites will be connected using ethernet leased line, so I'm thinking of connecting it directly to the switch...

ja raju by Level 1
  • 513 Views
  • 2 replies
  • 0 Helpful votes

I am practicing setting up OSPF virutal links and I never have done it before. I have a setup with 4 routers setup as follows.R1---area0--------R2----------area11-----------R3-----------area54-----------R4I want to be able to ping from R4 to R1.I hav...

burleyman by Level 8
  • 1812 Views
  • 9 replies
  • 0 Helpful votes

Hi,We have many  BGP neighbor relationships established on 6500 switch. We need to find out a particular pre-fix that is advertised to which neighbors. How can we find it out without giving advertise command for each neighbor.For example if we need t...

Hi,We have a customer who has 6 locations. They are connected with metro ethernet (point to multipoint)Their ip blocks are10.0.10.0/24 Site 1 (Main Office)10.0.20.0/24 Site 210.0.30.0/24 Site 310.0.40.0/24 Site 410.0.50.0/24 Site 510.0.60.0/24 Site 6...

Resolved! 887W Default IP?

I just received a 887W and would like to setup using the SDM.I don't know and cannot find the default IP.I would appreciate being told the default IP.regards, Mark

mgregory by Level 1
  • 6922 Views
  • 7 replies
  • 0 Helpful votes

I am facing a very weird situation with a certain 876 device.What I am trying to accomplish is to access an internal FTP server from outsideI am setting up a simple configuration (dialer0 outside, vlan1 inside, with or without firewall - I've tried b...

katsulis by Level 1
  • 1485 Views
  • 5 replies
  • 0 Helpful votes