Routing

Hi Experts,I am configuring EIGRP Stub routing as below:R2 - R0 - R1R0 is configured as EIGRP STUB. My understanding of EIGRP is when a router is configured as EIGRP, it informs the peer neighbors that he is the EIGRP and thus those neighbors will no...

Hi there,Given:Two giglinksTwo ds3 linksvlan x,y,z are via two giglinks as primary path and backup ds3's if both giglinks fails.vlan a,b,c are via two ds3's and backup giglinks if both ds3's fail. Tweaking the metric, delay or applying variance is i'...

Hi ALLI have a Internet Router with ADSL and Serial Module , I want that only SMTP traffic will go through the Lease Line and rest i.e. http ftp https etc should go out from ADSL.Regards/Asfar

We currently have two stacked 3750s which are connected to Cogent through a single BGP link.We want to get our own AS number and peer with two providers. Can the 3750 hold a full BGP routing table? does it need to? (must it be upgraded with more memo...

Hi All,May I know what is Ethernet handoff? Will 3620 router will support for that? What interface card do I need to use for that? Thank you,Siva

Anybody knows how to see the transmit interval (Tc)? I tried the command "show traffic-shape", but looks like that command only works for frame relay traffic shaping. I configured "police" in ethernet interface, with bandwidth of 320000 bps without s...

When my physical link to the next hop (gateway) is up and operational, my 0/0 route is injected into my routing table - just what I need.When the physical link to the next hop is down and not operational, I would still like to have the 0/0 route in t...

Hi Experts,If we have a link with 128 Kbps speed, for a particular class we shape itto CIR=64 Kbps, Tc= 125 msec -- Bc= 64000x125/1000= 8000 bit = 1000 byte.Given that, at the Bust period for this class:1- What will happen to a Packet from this class...

How i can configure source based authenticaiton for tacaus .......int fa0ip add 1.1.1.1 255.0.0.0ip add 2.2.2.2 255.0.0.0 secondary I want source IP for authentication should be 2.0.0.0/8 network ....And another VPDN Quevpdn-group 1 request dialin p...

I am trying to understand why I see a LOT of input errors on my WS-X4306-GB module in a 4506 chassis with a 1000BaseSX GBIC, which is connected to a Catalyst WS-C3750-24T, 1000BaseSX SFP.The Catalyst 4506 is running cat4000-i9s-mz.121-19.EW1.bin and ...

Hi Team,I have a new C2801 but the WIC-1T can't insert into slot #2. As I understand, WIC-1T can be inserted into slot #1 to slot #3. Could anyone know what the issue is ?RegardsLeung Che Man