Routing

Hi,I have a scenario where 7604 is connected (upstream) to 7200 (downstream) over 2 Ethernet links. OSPF is configured over 2 ethernet links. Ethernet links are connected to the switch and terminated as sub-interfaces in single physical interface of ...

Could Some body please tell me how can I route my webtraffic through the Bluecoat proxy server.I have given a default route on the Core switch topoint all traffic (0.0.0.0) to the external firewall and also the external firewall is directly conected ...

Hello,I am currently running the "ip cef load-sharing algorithm include-ports source destination" command on a 2821 router.The load sharing is done to five 800 series ADSL routers which are all connected via G0/1.I need to move this connection to a p...

Is there any working config?

How inter area route is calculated in OSPF routing process?As per my understanding , when hello packet is exchanged between neighbors which contain a Area ID field.Through this field routes are determined whether they belong to which area.If my under...

HelloCould somebody tell me why a network would be present in the route table and NOT in the ospf database?The network is converged and all networks are reachable.Sorry that I can't give any details.ThanksFrederic

I am using several of these modules in my network. The question I have is regardless of what slot this module resides in in a 3845 router, the fastethernet ports continue to report their position as fe1/0/2, 1/0/3 etc.I would expect these modules to ...

Anyone has implemented zoning in the network ?PAZ: Public Access ZoneOZ: Operation zoneRZ: Restricted zoneThanks

Hi all,I am trying to configure 1841 router with WIC-1T card and external CDMA modem.I have configured line tty interface for autodiscovery. Is it mandatory to configure chat-script?. I donot know the chat script details of the modem. How to go with?...

What is PASV FTP, and how does it diff from normal FTP

Dear All,In a cisco DSL router.Cisco 877 (MPC8272)Having IOS version: c870-advsecurityk9-mz.124-15.T5.binI am getting a NVI0 interface and its taking the same IP as Vlan 1 IP, so I am not able tp reach the internal network as I am not able to ping V...

Hi, I want to implement QOS on Router R2 which has T1 line. R2 should attemp to average on output rate of 64Kbs on the circuit.In case, R3 has accumulated Credit, it should allowed to send a Maximum of 12Kbs of data is a single interval. You can use ...