Routing

Hi ,I have configured the internet link in cisco 1841 router. In that I have blocked the in bound traffic using access-list and blocked outbound traffic using IOS filter. I have allowed outbound for ftp.http,https etc. inbound I have allowed icmp , e...

6509 IOS Ver 12.1(13)E16Sup 1 w/ MSFC2 Daughter boardWe recently replaced the chassis, flexwan, and the PA-MC-2T1 T1 card.When we perform a show mod, only the flexwan shows up not the card, when seating the flexwan into the chassis the "enable" light...

Hello All, I am attempting to use ACS for manage my User accounts for my router however. it seems that when try to go the radius tab in ACS and input the device security key the webpage does not recognize the key I have typed. it keeps saying...

Hello - I currently have a 3mb DSL line going to our ASA 5520. I need more speed at this location, but DSL is the only option I have. Is there a way, if I had a second DSL line brought in, to somehow "team" or use them both in my ASA?

HiI am using MS Office communications sever/client. We have an issue whereby UDP traffic seems to pass ok initially on a video call, but then drops off, leaving the video frozen on the end point, and may occasionally update. We have tested in front o...

what is the meaning of switch 1 provision ws-c3750g-48ts?Pl tell

Hello,I have a Cisco 1841 with Frame-Relay 128K. The site is connected to head office via VPN connection. All connections work fine via VPN but only one http connection! I can ping the address, but telnet on port 80 does not go through.I diabled CEF ...

Is it possible to configure LFI for traffic passing over an Ethernet interface? If so how?

I have a (1) POD CCNP lab setup that I recently started up for some practice labs. (2) of my 2501 routers seem to have some kind of issue but I'm having trouble isolating. Below are the errors I'm seeing. Can anyone point me in the right direction? I...

Anyone please explain why ip cef unresolved out puts shows some hosts ? which scenarios we are receiving such errors. Any links(documents regarding this) ? Thanks in advance.

Can the TFTP server installed by CiscoWorks be accessed outside of the application. When I try to send a config to the CiscoWorks server manually from a switch, I get a message:%Error opening tftp://wdcma215/rtpwdc-bir-sx01-confg (Permission denied)C...