Routing

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Labels

Forum Posts

Hello,I'm starting a new thread, as the last one died out without resolve.I have Centurytel DSL service and the modem is in bridge mode, so the PPPoE login session gets passed through to the router. They assign us DHCP addresses (even for static - s...

Hi all. I have a cisco pix 515e where the internal ip is 192.168.1.254 and dmz ip is 192.168.2.254. I have a router which connects 192.168.1.0/24 subnet with the ip 192.168.1.253 and connects to 192.168.3.0/24 subnet. There is a server on my dmz with...

donnie by Level 1
  • 3470 Views
  • 3 replies
  • 0 Helpful votes

HI All,Not sure if this is right here, but I have a 5510 which is doing a l2l vpn tunnel and it is the default gateway for the lan.Now , we have added 2 MPLS routers with the inside interfaces into the lan network.They are configured in HSRP mode , a...

Hello -I have a private network behind a Cisco 2611XM router that I want to limit access to only 2 specific IP addreses. Currently I have ACLs setup to do this but I would now like to NAT to those two IPs.I would like to do this:outside IP: 10.1.1....

cacmk5 by Level 1
  • 2879 Views
  • 25 replies
  • 0 Helpful votes

Please I have two link through diff ISP connecting me to the head office, I want to configure load balancing, so traffic can take the two link and the same time a fail over, how do i go abour it...2. Also i have another branch with EIGRP running. I h...

Dear alli have 2 offices, from office A i have 2 point to point leased lines(128kbps each)connecting to office B. office A ------------------- Office B 192.168.1.0/24 ------------------ 192.168.3.0/24i have not bundled ...

How important is it to have a routed connection between 2 switches in a routed server farm access layer?So, what we have are 2 server farm switches in an HA configuration with L3 uplinks from each to a routed distribution layer, as well as L2 trunks ...

lamav by Level 8
  • 2110 Views
  • 16 replies
  • 0 Helpful votes

hi, I have 3845 in my network connected to internet, i want to block all peer-to-peer application like KAZA etc . Please help me in configuring NBAR to block all types of torrent applications.Thanks