Routing

Hi seniors, Asking a stupid question,,,sorry I am new to networking...HOw can we judge that this is a classful or classless IP Network, say 10.0.0.0/26 is ,according to book, classful but in my knowledge 10.0.0.0/8 is classful...whereas mentioned ear...

Could anyone pls help me for the following issue ?After this , iam unable to get enter into the router.We are able to ping the router.We even did the reload of the router , still problem persist the same.Trying 192.239.131.147...Connected to 192.239...

Hi,What happens when NAT, ACL and RouteMap are applied on same interface. What operation will get more precedence for the packets entering the interfaceint fa0/0ip add 10.10.10.1 255.255.255.0ip nat insideip policy route-map ABCip access-list DEF in ...

hi guys, in my scenario i have a router that is connected to other routers ( lets say 10 routers ) through an ISP that is providing full mesh connection b/w them, we have made tunnels from every router to other routers to run ospf and provide full re...

Hello, A customer recently purchased the PA-MC-8TE1+ module for their 7500 Router at their head office. They would like for the T1 module to connect to their remote offices that have Paradyne CSU/DSU's which connect to a 2801 Cisco Router via V.35 c...

Hi,How to configure VTP Pruning.Any advantages by configuring this.Pls helpregdsNasheer

I'm seeing a strange error behavior on a 6509/SUP720. The net effect is that uploads to connected ISPs run slow. Very slow. Like, DSL slow, not the gigabit speeds of the actual connections. But tracking it down, the symptoms are weirder.Namely:We're ...

Dear sir, Which switch will support for this:-- 2 uplink slots supporting 1000 Base-T/LX / SX 1000 Base LX GBIC / SFP = I no. WS-G5486 plz give me the reply. regards srini

I am currently studying BSCI and cannot find an answer to this one: I know the routes prefered for BGP are the following:1 - Weight 2 - Local pref3 - Orig route4 - AS Path5 - MEDBut in many questions from Testking, I get an output, and the preferred ...

we are about to get the Maintenance Contract for 4 Nodes of PGW 2200 (9.4.1).20K of Port.Please help recommend the Collabrative Service Part number required, i can not found any info from website.THanks

We lost the config to and ADSL connection we have and there is no backup. I am trying to create the config from scratch and AT&T is no help. I can't ping toward the internet. Dub-DSL-router#sh ip int brieInterface IP-Address ...

I have a basic understanding of redsribing routes with a command such as thisrouter ospf 1 redistribute eigrp 1However, I do not understand the following scenariorouter ospf 1 log-adjacency-changes redistribute connected subnets redistribute bgp 6XXX...

I have been asked to build a test lab environment that looks like our production environment. I thought I would use policy and shaping commands on several VLANs in my 6500 to emulate T-1's and DS3's. Any suggestions? I realize I won't be able to get...

Hi Experts,We are utilizing a P2P link for access to a citrix farm and also to the internet via the customer network.I need to limit the amount of bandwidth the users in our network use over the link to access the internet, but I am just not able to ...