Routing

sometimes we are getting packet drops, but that time both BGP always up of both links.

I'm wondering if there is any command on cisco devices to show/identify its role as a router, switch and etc. like what we have on CDP neighbors but now for our local device with CLI. In other words, I need a command to identify the cisco device role...

Hi, Considering Cisco Smart licensing usage policy introduced from IOS 17.3.X, what would happen if we turn off reporting interval using the following command? Any malfunction regarding the devices' functionality? #no license smart usage interval Mor...

Hi all,First time posting on here, so please forgive if I'm asking in the wrong topic.I have a C899G-LTE-NA cellular router running on the AT&T network.  The modem inside this router is a Sierra Wireless MC7354 (Cat3 LTE).My question is, can I replac...

Hello, this is probably off topic but a quick glance and i didn't see a better forum. My ISR 921 running on 4G has been crashing on me, how can i fix it? Stack Trace:  000035: *Dec 25 23:02:41.413: %LINK-3-UPDOWN: Interface Cellular0, changed state t...

сем привет. для подключения удаленных площадок используются 4G роутеры Ruh irz с сим картами операторов по технологии М2М. Суть проблемы, все работает на оборудовании cisco 2921, но при попытке перенести туннели на новое оборудование isr 4331 происхо...

VPN problems AnyConnect cannot confirm it is connected to your secure gateway.  The local network may not be trustworthy.  Please try another network.

use of EIGRP 'default-information out/in' command ?

In loading state router will be having db from neighbor which will have all the routes. Why would router send LSRs again?

HelloWe are a multihomed ISP receiving just 2 default routes from Upstream ISP-1 and ISP-2. I have two LAN's which are advertised towards upstream ISP in the following manner -1] network 11.11.11.0/24 is advertised towards ISP-1 ( preferred ) and als...

Hi, After we upgraded our ASR-1001X to 17.03.04a from 17.03.03 we ran into the issue that the 10gb interfaces are not coming up anymore.We see the following in the logs:*Oct 20 10:17:50.807: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named TP-self-signed-1...

Hello, I'm having an issue with the EHWIC-4ESG not showing in the interfaces list. Router#show version Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.7(3)M6, RELEASE SOFTWARE (fc1) Technical Support: http://www.cisco.com/techsup...

I've attached my pkt file. I am having trouble implementing a DSL Server on a network. I have a simple version set up for practice, and it lacks proper ACL configuration. The hardware configuration I need is displayed in a colored box below the netwo...