Routing

EIGRP is the hybrid routing protocol right so we can classify it in both the class distance vector and link state is that right?

C 2651.If I want to see whether a "slot" is available in the router to let me add a new module there, which is the IOS command? Cisco works is not working to retrieve this info. I did 'show contr' but that didn't help me.

I've got a Cisco1841-AdvansedSecurity (don't ask me what for) and PPPoE connection through Ethernet-DSL modem. Before 1841 I've used IPcop-Linux Firewall. When PPPoE connection starts, Linux automatically recieved couple of DNS server from ISP, so I ...

Having a question for you all. We are redistributing between some external BGP routing to our internal EIGRP routing processes on two border routers that connect to this external network. These two routers are in different locations.The problem is t...

HelloCould anyone tell me what setting i apply to Hyper Term so when i go and copy a Config back to a new switch or router it dosent miss all copyed text,my tutor told me about this setting but i forgot to write it down any help anybody.Alex

This may be difficult question to ask as I can not draw it out, however I have no doubt that the expertise in this fourm will persevere and figure this out anyway:- two seperate networks A -> B and C -> D- A and C are in site 1- B and D are in site 2...

Our internet T1 is almost maxed out, and we're looking into adding another T1 from a different carrier. Is it possible to bind 2 T1s running Frame Relay, encapsulation HDLC and terminated in the same router?Thanks.

HI All;What value of Configuration Register we have to set in order to disable Break in CISCO ROUTER?

Hi everybody,I have a PIX 515, I would like to know if it's possible use it with two external internet provider. I mean I would like to cut our network in two subnet, one that will use a particular provdier to go outside in internet (a simple ADSL 2M...

Hi, Can anybody confirm whether GGSN Ver 6 & 7 is supported on a MWAM in a 65xx chassis?The IOS Upgrade Planner only has the image for GGSN 5.0 under the 6000-MWAM section and GGSN 6.0 and 7.0 only in the 7600-MWAM section.This has confused me as it'...

I set up a span for just one switch port on our 6509 and started a capture for "all span" but I am seeing traffic that does not appear to be for this port. What could I be doing wrong?

Dear sir , i have 3548-xl switche which are not supporting for aaa model .please kindly suugest the minimum reqirement in those swithces for aaa model

Hi everyone could someone tell me what this error means?dslsar_ng_transmit_pak_wrapper: deq(474C0A84). ATM vcd=1 Transmit VCD=1dslsar_ng_transmit_pak_wrapper : encap = DataI'm using IP over ATM, with simple configuration like that -interface ATM0/0/0...