Hi, I thought i got it setup correctly and i dont know why my status still "DOWN" please help. Thank you
Forum Posts
I have a Cisco FirePower 1010, this firewall is between a internal network and the ISP router.In the internal network, there is a computer that needs to connect to an external server by PPTP and GRE protocols.I tried to create an access rule on the f...
I have two ports 80 and 443 that come out as open when I scan my outside interface.I have not nat anything at all from the outside interface ip to anywhere(all it does is just an overload NAT), but I Natted from routable IPs that I have to the same i...
Resolved! VLAN DHCP, some not working
Dear Community, i have the following issues,C800 series router, 6 vlans, 4 vlans work perfectly, giving out dhcp leases, internet and so on.But Vlan 50 and 60 no giving out dhcp adresses. see attached show running-configenaC897#show running-configBui...
Hi AllCouple of BGP questions,Firstly, If I have 2 links via IBGP to another router, what do most people do to make it prefer one path over the other, weight is only local, so do people use local pref in and out the router so the traffic is preferred...
Hello, could you confirm that the ISR4400 router supports AC and DC simultaneously? 10ks
So I am trying to access a 2901/K9 ISR through the USB console port. So that I can reconfigure it because it is moving offices. So I downloaded and installed the Cisco USB Console driver (Ver. 3.1). It shows up correctly in device manager (See attac...
Hello, None of us can work this out. I wonder if it's the 4 hour ARP ageing? So we have a remote site with a single Cisco 3850 with a few devices plugged in and 2 x Cisco IE2000 switches trunked to the 3850. All 3 switches have default gateway that ...
Resolved! Peering Between BGP Route Reflectors
Hello, we're configuring IBGP over the WAN and and we have 2 RR's. We're configuring the same cluster-id on both RR's. I'm wondering about peering between the 2 RR's if it's necessary since they won't receive route updates from each other.
Resolved! Basic L2L VPN Lab Configuration
I am working on getting my CCNA and am setting up a home lab. I have 2 5506-x ASA's connected to each other via 1/1 and pc's connection via ports 1/2. I am using the most basic configuration I could come up with. I execute the command line configu...
Hi,I am preparing a couple of remote IOS upgrades and ran a test on a lab device.During the first boot of my lab device it showed an "% invalid input detected" on the console - so far nothing special, I guess some syntax has changed.My problem is tha...
Resolved! EIGRP PBR on NX7K
Hello,I'm trying to create a PBR to redistribute static routes into EIGRP on a NX7K. Cisco's document below states that the route-map policy needs to be implemented at the Interface level. My question is, do I need to apply this policy on every inter...
Hello guys.Thanks in advance for reading my question.I'm kind new in the network world and I'm assuming a new role in my company, so I have new challenges.I have attached a file with the scenario I'd like your help with. Question:On Router-1 we have ...
Hi,I would like to know if it's possible through multi vrf, nat, to connect 3 identical subnets to a catalyst 9300. My goal is to manage these platforms from a unique subnet with desktops. I have tried to configure the Catalyst 9300 to test this, but...
