Hi everyone, I'm currently attempting to enable the controller mode on an AWS C8000v router that operates under the PAYG billing model. However, I encountered the following error message: % Autonomous to Controller mode change blocked: Mode switching...
Forum Posts
Hi, I'm running some tests in my lab, on one of the site I'm try to implement a design involving both traditional routing and vEdges : On this pic, right now for the traditional part of the network, only SW3 and R1 are up and running with OSPF (ever...
Hi , we have a customer planning to deploy catalyst 8000v on ESXi/KVM environment for SDWAN use cases. we are looking for compute sizing required but could not find in any document, please suggest if anyone has done such deployments and how you calcu...
Hello,i have deployed 2 cat8kv in AWS. i am connecting there with a local user called "admin". now i want to move to tacacs+ but obviously it does not use the tacacs-server...although the connection to the tacacs-server is up (so it states that the t...
Hello all,I have a Viptela Vedge 1000. When I select the device on Vmanage , I can see my default route in the running config; however, when I SSH directly to the device, I do not see the default route in the running config. The default route is pres...
Would you say the TLOC is present in the underlay or overlay?I think it is both, as the "next hop" for prefixes in an overlay VPN will resolve to a TLOC, and the TLOC contains the public and private address required to route the packet, in the underl...
dCloud SD-WAN 20.9 Custom Topologies import/upload topology. I created topology with SD-WAN 20.9 Custom Topologies with version 20.9.1 and exported to tar.gz fileWhen I import/upload the topology, I can modify any device and/or add new link.It looks ...
Dear Experts,I'm looking to connect my two window PCs with an optical networking card (PCIe card) using fibre optics cable and I wish to achieve a 100gbps data rate. The wavelength I'm looking at is single lambda (~1550nm) possibility QSFP28. Can any...
where can I find a copy of the CCC certificate for a Cisco Meraki MX84? We shipped one to an office overseas and need it to clear customs.
How does Cisco meraki template work for switches of different branches bound in it? Template has a base configuration however how does switch gets its appropriate gateway and dns servers?
Hi All. I have Catalyst 8000v (iOS 17.6.3a) running on AWS instance and I need to create GRE tunnel to AWS Transit Gateway for redundancy reason. I use CLI template because as I check on vManage 20.6.3 there is no GRE template configuration available...
1.When we buy new Viptela edge device from cisco then we get serial number and that serial number ,we add to cisco smart account or cisco PNP portal and we get serial file of that edge device.after this ,do cisco smart account gives information of th...
Dear Community, Currently we have a setup with 2 (two) C8500-12X4QC Routers. Those are located in our Datacenter where we also host some services to the public internet (services like mail, web and alike). Is it possible to configure those routers to...
Hi All,I'm not able to find Cisco SD-WAN 20.4 (RESERVE) sandbox lab, only getting Cisco SD-WAN 20.10 (ALWAYS-ON).How can I find it?Quick help will be appreciated.Thanks!
I have a quick question regarding SDWAN.So imagine this network is currently a star topology, each of the ends are cisco switches and the center is a palo alto firewall. They are looking to make each of those sites that have a cisco switch to have th...
