Server Networking

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco UCS X-Series Energy Efficiency Offer

 

Forum Posts

At the moment we are having an issue with NLB Multicast on a Windows 2008 R2 server in combination with a 1000V. We are trying to setup that the multicast mac address is dynamicly learned by the Nexus 7k Coreswitch so that a static arp entry is not n...

wgdejong by Level 1
  • 1416 Views
  • 1 replies
  • 0 Helpful votes

Resolved! vPC to ASA5525-X

From the ASA I should be able to ping 10.170.105.1 without a route because they are directly connected, yes? Unless the ASA does not follow the same rules. I also noticed in the show int tru command that po105 is forwarding "none"N5K1N5K2ASA5525-XNEX...

Hello,We recently had a power supply failure in one of our Nexus 7000s, and I noticed that the syslog for the Platform is only present in the default VDC, and not in any of the other VDCs syslogs. Is this by design, or is there a logging level I can ...

With reference to the vPC loop prevention mechanism that was discussed in this post http://www.ccierants.com/2012/03/vpc...d-to-know.html- if a Nexus 5K receives a packet on the vPC peer link that is in a VLAN that is in a vPC, that packet will not b...

HiI have two Nexus 2248 FEX TOR design, and I need to connect my four ESX 5.1 servers. My initial design used the Nexus 1000v, 2 etherchannels upto the nexus 2248's and a vpc link for redundency    N2k          N2k     |               |     |    vPC ...

We have a Nexus 5010 on 4.1(3)N2(1) with a GLC-T SFP (1000BaseT) in port 1/1. I've set the speed to 1000 Mbps, the transceiver is recognized but whatever we do, the port remains " down (Link not connected)". Swapping cables or SFPs does not make any ...