Server Networking

Hi,I have some questions regarding FWSM and CSM. Thank you in advance for your feedback.I am using a pair of 6513 with one fwsm and csm in each. I am setting up a dmz environment with these units. fwsm is the second tier firewall (a pair of PIX 525 a...

Hi,Does Cisco provides 10 Gigabit Ethernet on copper.Please reply at your earliest.Best Regards,Rahim

I migrated from 6500 hybrid (IOS+CatOS) to IOS-only. After that, the policy-map applied in some interfaces only work in one Catalyst. For example, if a put the interface vlan X active in one cat with the bandwidth limited to 3Mb, everything is ok. Bu...

Hi,I want to get the status(Act/Standby) of ACE module by SNMP polling.But, I can't find the appropriate OID.(I know that show command is available, but I want to watch the status by SNMP polling)Doesn't ACE have the appropriate MIB ?thank you

I have a problem my frame-relay point-to-point network: Actually, the primary site equipment is a Cisco 2801 ISR and the remote site is Cisco 1005 and with this deployment full service working satisfactory but when I do change the 1005 router por Cis...

The server / datacenter guys here are seriously looking at the HP c-Class blade system and the Cisco 3020 blade switches. I like the fact that the 16 internal ports remove the need for me to manually patch each individual bladeserver, but I'm concer...

Hi, im having issues with configuring a CSM-S. Our standard config with a content switch module and ssl module is to have the SSL proxy vlan on a differing layer-3 subnet, and the CSM bridging between the client & server vlan for non SSL loadbalacin...

Hi, I have a need to terminate 2 SSL connections on our CSS11506. The backend web connections are http 80. In order for this to work do the web servers need to be connected to the CSS switch ports or can I have then located on another segment (sepera...

Currently, we are running this:Cisco 7206VXR (NPE300) processor (revision D) with 122880K/40960K bytes of memory.Processor board ID 18278379R7000 CPU at 262MHz, Implementation 39, Rev 1.0, 256KB L2 Cache6 slot VXR midplane, Version 2.1The question: w...

On our current infastructure we have a number of Vservers built , utilising vserver SSO-GP-443 serverfarm SSO-GP-SY-443 backup SSO-GP-NW-443Both server farms show up and available until we fail the primary server farm, when this happens the Vserver ...

Hi netpro :I have a problem .in the illustration.The first solution :I config the router A and switch A and B running rapid pvst ,the switch A is root,and switch B is seconder root ,if the black link or red link is broken , convergence is less 1 seco...

We have a need to terminate multiple SSL websites on our CSS. So name1.test.com name2.test.com, name3.test.com etc. The problem I have found is that I need to burn 1 public VIP per SSL connection b/c they all need to use tcp 443 inbound and point to ...