i'm having trouble provisioning the SG350-10.
With legacy IOS (for example 4948) the script is working and the SW is pulling the config.
But the SG350 receives the IP but not the config, also Wireshark is showing no TFTP attempt.
is this SW usi...
I have been tasked to setup a 2951 for SIP on a Broadband circuit. The second part of this is to add a backup solution because we all know how reliable broadband is, it never goes down (now that's a lie), hence the reason for the backup plan. ...
The router (RV340) has been operating for about one year and so far there has been no serious setup change.In the first set of rules, has given us port forward rules, without problems.
There is another similar error in the posts,
I have the above mentioned equipment and had some difficulty in configuring them for vlan routing in order for the ISP IPTV to work. In short, port2 of the ISP supplied ONT only carries iptv signal that must be connected to the set top...
With no other changes to either call manager or the SPA device, if I enter one call manager's IP address as the proxy and set the spa to NOT use DNS SRV, everything works perfectly. If I enter a domain as proxy and tell the spa to USE...