Software-Defined Access (SD-Access)

I have a few instances where I am not seeing the topolgy links to access points. I have tried to resync the switch as well as re provision the AP. I can see the AP via cdp. How do I go about getting the topology links back. I cannot comment if they w...

HiI have a test SDA setup and I've selected Lisp Pub/Sub as the method.  Should I expect to see iBGP between my two Borders?  I don't recall configuring it but it's there. I'm also using the Extranet feature and handing off to the external network on...

HiWe have a 3rd party system for Heating etc and have noticed since we migrated to SD Access that now when a edge port sees several mac addresses that they are blocked  I see this on ISE, the 3rd party use somesort of hub to connect their devices the...

I'm testing trustsec in a test environment.I connected a test PC, on a port of a 4500 Sup8 switch.Initially I excluded Dot1x(TEAP) type authentication and configured a static mapping on the port using the cts manual policy static sgt command.While an...

Hi everyone I was wondering if there is a Security Configuration Guide for Cisco Software Defined Access in regards of device hardening in a SDA fabric environment. I found the regular security configuration guidelines for the released IOS-XE version...

Dear All,I have setup a trustetsec laboratory, composed by a ISE 3.2 patch4 with Premiere license, connected to cisco 9500, that has two links one connected to a 9300 (with network-advantage license), the other link is connected to a 4500 sup8. I hav...

Hi,I'm looking for Cisco-DNAC-MIB to download, I just found mib browsing reference at :https://mibs.observium.org/mib/CISCO-DNAC-MIB/But the mib is nowhere to be found, is this browser actually true to mib's existence or just a made up explanation.

I'm trying to apply SGACLs to do micro-segmentation in SD-Access.Right now I have 2 ports with statically assigned SGTs, one is "Employees" and one is "Guests", both in the same VN (subnet).I have a Policy created in DNA-C that says SGT "Guests" to "...

Hi All,we recently moved our infrastructure to SD-Access interconnecting three sites via a pre-existing MPLS network using IP-Based Transit. Now we are planning to interconnect new sites and we are evaluating to use SD-Access transit or SD-WAN Transi...