I have customer desparated to replace the 48P N5Ks which connects both compute as well as native FC SAN...But from what I can see, there are not many N9K models support native FC anymore...I guess I could recommend MDS but they would still need data ...
Forum Posts
I have a question, what is the difference or application of the fiber interconnect switch FI (FI 6454) and SAN switch (MDS 9148). I understand that San uses it for fast switching of larger data between server and storage. Then why the FI for? Like FI...
Hello I just thinking if i can connect two of Cisco C9148S MDS SAN switch or it not applicable, I have a storage with two MDS's at "Site-A" and UCS Server with one MDS at "Site-B" as the below figure:Please need to know if i can connect "SAN-2" with ...
Hello We have two of Cisco C9148S MDS san switch connected to EMC unity storage with multimode connection (DS-SFP-FC16G-SW) & (Avago 16Gb SFP+ SW).as we need to relocate it, can I connect one of the MDS with the storage with single-mode dark fiber (D...
Hello I am just asking if i can using Nexus C3548P-10GX switch as SAN switch to be connected between the storage and servers.Appreciate your support Thanks
Hi,We added a new MDS9148T switch to existing SAN fabric and expanded the fabric. The new MDS 9148T switch is the principal switch after fabric merging.Before adding new MDS 9148T, the fabric had one MDS 9148S switch and one Nexus 5K (N5K-C5548UP) sw...
Hi Community,Greetings!!In order to reduce the risk we need to upgrade the SSH on MDS switch. Can someone confirm if the SSH upgradation for MDS swith is same as Catalyst Switch.Thanks
Just upgraded from 7.3.0.DY.1 to 8.1(1b) per Cisco guides. Now I am trying to update from 8.1(1b) to 8.4(2f) and I get a non-descript message about not everything in the image being compatible. I assume maybe the ssi image is a problem, but I'm havin...
Hi Guys, PID: DS-C9148S-K9 Since 5 months ago till now, In my Cisco MDS 9148 16G SAN switch has shown some frequent error logs as below, 2008 Dec 22 08:57:09 PROD-CISCO-SAN-SW2 %PMON-SLOT1-3-RISING_THRESHOLD_REACHED: TX Credit Not Available has reach...
Resolved! renaming a switch whilst in production
Hi There,Can i rename a switch whilst it's in Production?We have Cisco MDS 9513 director with SANOS 3.02(b)..If we can then what are the steps to be followed.
Hi there everyone, I'm reaching to see if anyone knows how to add new MDS switches into an exisiting VSAN in Nexus Dashboard Fabric Controller (NDFC version 12.2.1.316). This option was available in Data Centre Network Manager (DCNM) by going to Da...
Anyone know how to reset the password on a Nexus 3000? I have tried the procedures for the Nexus 5000 with no luck.
Hi.We have 9336C-FX2 and i trying to configure it for SMB-Direct RDMA using PFC. If i globally enable PFC watch-dog forced, Queue goes to state Shutdown even if watchdog is off traffic won't goes. Howewer on old 9396PX with N9K-M12PQ module everys fi...
When we upgraded the firmware on one of our 9509 switches, from 3.3(1c) to 3.3(4) we now can't login via SSH. We get the error message "Server unexpectedly closed network connection". I changed the login to allow Telnet and I can get in via that but ...
What is the latest supported version that we can have while creating datastores in the HyperFlex?
