Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, February 2, 2026, through Friday, February 20, 2026. Our colleagues Amruta Navadagi, Anaya Kalawat, and Mohammad Mehtabuddin will be waiting to assist you...
i have a 3850 stack of 2 switches in my mdf. i have another switch in my idf connected by fiber. everything has been good for years. i just added another 3850 switch into my stack in my mdf. now i cant access by idf switch at all. cant ping or p...
Hi there, we have a new customer, who accidentally purchased these switches: C9200CX-8UXG-2XH-E He want to use these switches not in a DC environment (that is why these switches exist), but ina normal AC 230 VAC environment. I checked the datasheet a...
Hello, Due to an emergency, and until the appropriate transceivers arrive, I need to install SFP-10G-SR transceivers in a Meraki MS225-24P. Are they compatible?Thanks
Hi, we have configured netflow on Catalyst 9300 switch, but seems it does not send traffics to Solarwinds. We have configured NTA for this switch. But solarwinds never receive any netflow traffics. Below is the netflow config on C9300. Can someone pl...
Hi,I have been reading this document : https://documentation.meraki.com/Switching/Cloud_Management_with_IOS_XE/Design_and_Configure/Cloud_Managed_EVPN_Fabric_Technical_GuideI'm wondering if it is possible to have a Campus Fabric in Routed Access in a...
Switches - MS software versions MS 18.1.8.1 changelogImportant alertsMS130-24(P) switches will reboot twice during the upgrade process when transitioning to MS 18.1.8 (or later) from MS 18.1.7 or earlier. This behaviour is expected, and is not indica...
We had to abort a production deployment of a Meraki cloud-managed Catalyst 9300 stack because the configuration is lost after a reboot or power cycle.The stack has two C9300-48UNs and four C9300-48Ts running IOS XE 17.18.4.1. It works normally until ...
Hi,The customer wants to connect CCTV cameras to Catalyst 9200 & 9350 switches with Essential license.I checked the license feature matrix and found that in Essential license, only PIM Stub Multicast is enabled, and in Advantage license it shows it i...
HellouThis bug has been around for years as far as i know / observed it. Just wanted to sort of know if somebody did managed to get around it.If i ssh into the old cbs350 or c1300 now, and send a block of text (like description for every port...etc.....
Hi everyone,I need to upgrade C9606R Core switches, currently running IOS XE 16.12.4, to a newer release. We are considering IOS XE 17.15.6 MD as the target version.The two chassis are configured in StackWise Virtual.1. Is a direct upgrade from IOS X...
Hello all,can you please help me undestand this TDR test result run on a C9300L-48P-4X Switch, what i dont understadt is the Pair A.show cable-diagnostics tdr interface Gi1/0/26TDR test last run on: October 15 13:55:38Interface Speed Local pair Pair ...
A few of my networking switches stopped working after water accidentally got inside them, and now I’m confused about whether I should get them repaired or just replace them with new ones. I mainly use them for office/network connectivity, so reliabil...
Someone pushes a template. Twenty networks lose their SSIDs, VLANs and firewall rules in one click. The audit log says "Admin applied template" and nothing else. The dashboard knows something changed. It just has no idea what things looked like befor...
Hi,Please advise. I have a stack of three C9200-48PXG on 17.9.3 and i want to upgrade it to 17.18.4 but only one of them gives flash short space error and unable to copy the image. ( install mode )- why only one running out of space ? and i see no f...
As Attachment snap showing the scenario, i need a suggestion to get (http/https/pop3/smtp) access for the network(192.168.0.9) through the internet server(192.168.0.123) placed on the other side of my router(LDC_Sharaf Router). Basic routing is enab...
