Switching

Hi community, IOS Version 15.2(4)E7 I am trying to use parser view to restrict some commands for user.For example: allow user only two actions - create vlan and name itParser-view configured like this:parser view senior secret 5 $1$UgXf$K/RFpnFQPntc...

This is a unique issue as TAC has been having a hard time figuring it out.  One minute it starts working, another it doesnt.  So to break it down, we are using: Not WorkingCatalyst 9410 -- Latest version 16.9.4 with two patches. WorkingCatalyst 4506 ...

Hello everybody, I would like to authenticate a Cisco IE1000 switch against our Microsoft NPS server. Unfortunately, this does not work. We already have Cisco 2960 in use, it works without problems with the following settings:  look at Attachement Ho...

We just received Cisco 4321 and 4331 routers with 2x NIM-ES2-8-P modules installed that we planned on using to backfill older switches and routers in areas with less than 14 users. The switch ports on the modules will be used as access ports and comp...

Hi erevyone, I have a cisco sf300-24p switch and i need to authenticated this on radius server. Radius server deployed using FreeRadius package, on debian 9.1. On radius I created user same this config: admin Cleartext-Password := "admin" Servic...

Hello everybody,Is there a way to ignore bellow messages from logging buffer/console? I dont want to see them. 2496543: Jan 8 13:13:00.691: %DOT1X-5-FAIL: Authentication failed for client (xxxx.xxxx.xxxx) on Interface Gi1/0/18 AuditSessionID 00000000...

Hi, Dont know if anyone can help. I've set up RADIUS authentication on a test switch and started implementing it in the live environment. We're using an windows NPS server for the authentication part which works well. Although I am a little confused ...