Hello, We have only one admin user account created in Nexus and unable to access with the same admin account now. Can someone suggest how to recover or access the switch.
Hello, We have only one admin user account created in Nexus and unable to access with the same admin account now. Can someone suggest how to recover or access the switch.
Hi, I have 2 cisco 3650 24ts-s switch i wanted create a stack can any one please tell me the part number on the stack module and Part number on he cable .
Hi Dear Friend In switch nexus 3000 when config no negotiate Auto on the physical port (config-if)# no negotiate autoERROR: Ethernet1/27: requested config change not allowedHow solve this My problem With 10G card 530FLRDo not plug
is RSPAN supported in Catalyst C1000 switch?In cisco documents, I can see only about local span configuration. It doesnt say anything about RSPAN.
Hi All (New guy) I have this topology SW1 ---- R1 -----R2-----SW2 R1 and R2 are in OSPF area 0 and all is good. SW1 and R1 are in OSPF area 10 and they can ping each other. SW2 and R2 are in OSPF area 20 and they can ping each other. Th...
Is there an easy way to only show Vlan Interfaces that have an IP addresses applied to them aka SVI? Currently I am doing a 'sh run'; however, I feel as if there might be a better way. My hardware is a mixture of NX-OS and Cat. Thank you
HI Team, I am using Sandbox Always On vManage Instance. How can I create alarms or may be events via vManage ? Basically we wanted to create alerts & will consume these alerts in third party Monitoring application via Alarm API Thanks
Hi,I get lots of EXCESSIVE_PARITY_ERROR - Messages on a 6880X running in a VSS.Example:Jul 29 13:04:56 10.15.1.239 361325: Jul 29 07:48:22.849: %EARL-SW2_DFC1-1-EXCESSIVE_PARITY_ERROR: EARL 0: Parity error detected in VRAMJul 29 13:04:58 10.15.1.239 ...
Dear, I would like to know if it is possible to create a weekly backup of configuration with Cisco Router. I tried with this configuration but the result is "abort": event manager applet "name_of_event"event timer watchdog time 604800 (about 7 days)a...
Hello All, I have a 3850 here and I received these logs suddenly : Jul 31 03:46:17.568: vlan manager pkt rcvd on Port-channel1, length 102 Jul 31 04:06:39.786: vlan manager pkt rcvd on Port-channel1, length 102 Jul 31 04:11:45.496: vlan manager...
I have a vlan 5 connected directly to core switch. I have another vlan 10 connected to firewall. Core switch is connected to firewall through inside interface. In trunk link between core and firewall, i have allowed only vlan 10 (i understand vlan 10...
Hi,Question regarding a Cisco 3850 & Stack .I´ve two 3850 switches stacked.sh switchSwitch/Stack Mac Address : c025.5cb9.1b80 - Local Mac AddressMac persistency wait time: Indefinite H/W CurrentSwitch# ...
I have 6nos of Cisco Catalyst 2960X-48PS-L - switch and 12nos of Cisco Catalyst 2960X-24PS-L - switch that powers on fine but no LAN port indicates network traffic light after its switched on and after a long time, some will restart by itself again a...
Hello guys,As far as I know cisco made SFP based fiber switch. But I need fiber port based switch where I can connect fiber port directly without SFP. So cisco have any switch which has a fixed fiber port on switch but do not need SFP port seperately...
Hello everyone, After some unsuccessful research, I would like to request your help and advise. I have looked for similar issues around the web but didn't find the solution so far. I am trying to configure a Cisco Catalyst 2960L-SM, this kind of swit...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
07-23-2025 01:45 PM | ||
07-08-2025 11:44 PM | ||
07-04-2025 02:13 AM | ||
06-26-2025 10:05 AM | ||
06-16-2025 07:47 PM |
User | Count |
---|---|
13 | |
11 | |
9 | |
5 | |
4 |