Resolved! 2800 series router
which IOS support IPv6 that i can install on 2811 router model. currently am using this ios version: adventerprisek9-mz.124-15.t5.bin
which IOS support IPv6 that i can install on 2811 router model. currently am using this ios version: adventerprisek9-mz.124-15.t5.bin
I inherited some 24p 3750's for our infrastructure running IOS 12.1(19). I have 2 48 Port WS-C3750X-48P switches running IOS ipbase9k-mz122-55SE3. The 24's wont stack with the 48's so I updated the IOS images on the 24's to the same IOS as the 48P. ...
Hi all, There is no counter on interface vlan 999 on nexus 7K. Is there have some workarounds to fix this ? As far as I know on Catalyst 6500 or 4500 there is a counters command under interface Vlan, does nexus 7000 have some function?Vlan999 is up, ...
Hello,I was trying to solve some issu on QoS configuration (on a 3750 switch) , using the "show platform port-asic stats drop".I had this output : Interface Fa1/0/26 TxQueue Drop Statistics Queue 0 Weight 0 Frames 0 Weight 1 Frames 0 ...
HiIve come across some connectivity that I am unsure of. I have a switch with all ports set as access vlan 10. another switch has access vlan 18. there is a link between the switches from access port to access port.It has been configured like this on...
Hi All,I'm trying to get some 3850 switches configured together as a stack. I have six in all, 4 x 48 ports and 2 x 24 ports. I've connected the stack cables up in the right order and initially I connected the new Stackpower cables too. What I did...
If we are making a switchport to be Layer3, do stp run on the port?
Hi I had alwasy configure on catxxx router for ip SLA using track, now I need configure a route on asr1004 which means if a interface down, the related route (static route) will not be send out to next hop. I have looked the command on asr1004, and ...
i want know.... cisco WS-C3850-24P-L upgrade to IP base license??????? as like [ WS-C3850-24P-S]
Hello, I have a user whose access to the LAN (and, more importantly, to the WAN) I need to be able to allow or deny as required. The user's IP address may vary so I would like to control access on the basis of his MAC address. He's likely to be conne...
Hello, I would like to know if i missing some configuration for OSPF/EIGRP route filtering using distribute-list, Left-router-center router running OSPF 1Right-router-Center router running EIGRP 1Problem:I am able to ping from Left-Router to Right ...
There is a 2960 switch with a management IP address of 10.199.3.20/24.My IP address is 10.20.3.251/24 and i connect to the switch over a routing network.When I checked this switch I found there was no ip default-gateway for the switch but I could con...
is there a way to push these 2 commands on all Cisco devices at once?no username <old user> privilege 15 secret <old password>username <new user> privilege 15 secret <new password>thanks
I would like to ask if anyone can help with the project that I’m currently working on for my Network Security class. The project consist of giving recommendations and visual images of the IPSec protocol in detail that includes tunneling, architecture...
I would like to ask if anyone can help with the project that I’m currently working on for my Network Security class. The project consist of giving recommendations and visual images of the IPSec protocol in detail that includes tunneling, architecture...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
05-30-2025 10:17 AM | ||
05-27-2025 03:30 AM | ||
05-27-2025 12:59 AM | ||
05-23-2025 10:30 AM | ||
05-15-2025 09:37 PM |
User | Count |
---|---|
9 | |
8 | |
5 | |
4 | |
3 |