Hello,I'm setting up Netflow and wanted to make sure I wasn't missing anything or If it could be setup in a better manner?Router is 2801 Switch is C3560IP flow export is version 9. On the router I have one fastethernet port going to the high speed WA...
I'm experiencing issue with DHCP on Nexus 5K. I have ip dhcp relay address defined on the SVI (Vlan 10). In addition to that I have few another DHCP servers on the same broadcast domain. interface Vlan 10 no shutdown vrf member CUSTA ip address 17...
can help me please, i wanna know how many private ip can translate into one ip public?
All, It was not clear to me what is the backplane of the switch WS-C3850-24S-E (24 ports). I need to know what is the backplane for layer 2 and layer 3.Does anyone have this information?Thank you!Luciane de Medeiros
Hi All,I have configured sticky in ACE but show status sticky but it is showing zero connection and show database sticky showing empty..
Hi,I would buy a 1911 series router with a lan EHWIC-D-8ESG module. I saw forums that this router does not support the communication ports between switches because it does not have the MGF (Multi Gigabit Fabric).Could you please confirm?Can we allow ...
Hi,configured NetFlow on a 3750-X with Network Module,but it generates only interface-tables, no templates or flows.Here my Config:flow record Ingress match datalink source-vlan-id match datalink dot1q priority match datalink mac source-address match...
I am trying to configure site-to -site VPN in my router 2811 with following config:Cisco IOS Software, 2800 Software (C2800NM-IPBASE-M), Version 12.4(15)T10, RELEASE SOFTWARE (fc3)Technical Support: http://www.cisco.com/techsupportCopyright (c) 1986-...
why reload is required to have the stack working.Attached are my findings as i am not able to paste the data here.
why is it good or not good to set port security switchport maximum 1 ? Someone told me it is not good. Please explain me this.
Hi,While trying to upgrade 6500 IOS from 12.2SX33 to 15.1(2) code I get the ROMMON mode and it give the "cannot load the monitor library bootdisk:%c7200-atafslib-m" error message. I formatted the bootflash before loading the new image. Now I can't ev...
We are looking at replacing the routers at my place of business. It is a small organization with about 200 users. We have 3 branches. The topology is a basic hub and spoke with 2 remote sites that are connected with our main site by SFP fiber capped ...
Dear all, Can I terminate 40 Mbps DSL BROAD BAND connection in Cisco 800 series router?.It is not a leased line.Which Router model is best for 40 Mbps DSL Broad band termination ? Thanks&RegardsAjay Jose K
Here in my company there are Cisco small business SF300 series, small business switches and Cisco 2960 Enterprise switches. The problem is after some time their fastEthernet port has stopped working. How can i resolve this issue? I have tried to rese...
Thank you for all of your help.I made my question simple.When a router has multiple active subnets, hosts can ping with another subnet's GW address.Please see the following image.I made two types of structures.Three success examples with red square s...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 07-23-2025 01:45 PM | ||
| 07-08-2025 11:44 PM | ||
| 07-04-2025 02:13 AM | ||
| 06-26-2025 10:05 AM | ||
| 06-16-2025 07:47 PM |
| User | Count |
|---|---|
| 13 | |
| 11 | |
| 9 | |
| 5 | |
| 4 |
