Switching

Hello, I have CISCO 2960, LANBase last IOS revision: Model SW Version SW Image ----- ---------- ...

Hello,I have CISCO 2960, LANBase last IOS revision:Model                                       SW Version                                    SW Image -----                                                 ----------                                    ...

Hi guys,I have a running critical Port-Channel between two locations.Here's the configSW1:!interface Port-channel2 switchport switchport trunk encapsulation dot1q switchport mode trunkend!interface GigabitEthernet1/45 switchport trunk encapsulation d...

Hi Experts, trying to establish MEC between VSS & two different stack members in stackwise ( master and one of stack member ).I gone through cisco document where I understood that PAGP would not support in this scenario ( BFD would not work ) because...

I'm trying to get multicasting working over a 3750 stack. The ios is an ipbase one, so i can't run ip pim sparse-dense over the SVIs. I was looking at a stub configuration.This is my network:3750 stack and a 3900 ISR gateway. I have 2960S in closets,...

Hello,we are having a "suspend" issue to portchannels with 2960S switches only.On our core switch we have the following setup:interface Port-channel68 description EC DELEJ02SAC88 switchport switchport trunk allowed vlan 6,7,10-12,19-21,30,63 switchpo...

  I have 871, (2) 2611xm, 2501 (for whatever reason), is there a way to reset everything on these.  I got them used, I am almost done with the ccent and I think I am just making my configs more of a mess then what they were when I got them.  I am sur...

We have cisco C6509 as Core Switch, 4507 as a Distribution switch and Cisco 2960 & Juniper EX2200 as Access Switch. We configured storm-control commands on each of access switches and as well as on 4507 ports where access switches are connected. But ...

Hello,Can someone explain me what exactly the tunnel-group and group-policy does in VPN client configuration. Can someone explain with a simple language not refering to any document as im non-techie guybelow is the configuration i would be very thank...

Hi,Got confused by reading too many documents regarding the PFC,MSFC,SP and RP.PFC - Policy feature card and know the use of it. MFSC - Multilayer Switch Feature Card and know the feature of it.For Sup 720: How the PFC and MSFC are integrated. Are bo...

Hi there, I want to have HSRP configured in my two cat 3750 routed port, the routed ports are connected to two Nexus router also running HSRP. Is it possible with this kind of set up? I tried configuring HSRP on each router port of the L3 switch, but...

Hi Cisco GurusI have a problem with the configuration of a Switch Cisco:Switch#show flashDirectory of flash:/    2  -rwx        2002   Mar 3 1993 02:14:20 +00:00  config.text  584  -rwx           5   Mar 3 1993 02:14:20 +00:00  private-config.text  5...