HiI am using cisco 3750 switches. I want to know if there are options to record or log all the commands that will be executed at the switch.ThanksHamid
Hi allWe have a alarm at least 1 per day for some of our switch.Info 04/20/2011 08:55:24 <switch> Temperature State: normalSevere 04/20/2011 08:54:20 <Switch> Temperature State: notPresentcheck on the airconditioning system seems to be ok (i have req...
Hi,on a catalyst 6513 we experience the following error message for several times,%LTL-SP-2-LTL_PARITY_CHECK: LTL parity check request for 0xD4B6The switch is working properly and we don't experience any problems. I've tried to find a hint at Bug Too...
Hello All,I have a really odd question and I am not certain where the issue lies.....I am running 6505 Cores with 3750 floor switches. My VLANs are configured by floor such at 192.168.1.X for the first floor and 192.168.2.X for the second floor and s...
hello,I want to connect two switches of 6500.I want to use in int vlan, I assign the port (tengig) to vlan 55. (Drawing)the commands:6500A:int tengig1/1 switchport access vlan 55int vlan 55 ip address 1.1.1.1 255.255 255.2526500B:int teng...
We have a new ASA5510 firewall (192.168.2.2) configured as a PPPoE connection. In the firewall, there are few static routes as follows:route outside 0.0.0.0 0.0.0.0 11.22.33.55 1 route inside 192.168.1.0 255.255.255.0 192.168.2.1 1ASA5510 firewall c...
Hi all.I'm new to the cisco IOS system. I'm also italian, so I can make mistakes while typing.I have the following problem: I need to connect my router to the internet using a PPPoE Tunnel (it will act as a gateway). The router is connected to my ISP...
I did this on the router:----------------------------------------------------------------------------------------------------------------------------------------------------------------------rommon 16 > IP_ADDRESS=10.1.1.103
rommon 17 > IP_SUBNE...
Hi,I want to configure SNMP on cisco Switches 2960/3750 to get switches detail like UP/Down, overload, performance. I need configuration steps for it.Amin
Hello,please see my config as I just setup a 1721 router to have internet ppeoe access through dialer 1. It is connecting fine and getting wan ip and can ping by hostname even from lan machines to the internet however browsing works only for google s...
Hi every bodyHow is every one do doing ?Please consider the following example: Network-----SW---------SW1--------------------Cisco ip phone-------------------------PCThe goal is to isolate Cisco ip phone 's traffic from the traffic generated by PC.M...
Hello,I currently have a scenario where a multicast source is on the same vlan as multicast receivers. Both source and receivers are on the same switch.I'm finding strange different situations regarding multicast source traffic flooding containment. ...
