I am having trouble bringing up a second VLAN on a Catalyst 3750 running 12.2(25)SEE.The first VLAN (101) is working fine. The second (102) is Down/down. Here are the config sections that I have scripted:bbswitch0-live#sh run int Vlan101Building conf...
Hi,6506 is in hybrid mode, cannot telnet to it anymore. Could be telnet sessions are full and didnt clear.how can I clear the telnet session.I am able to login to switch module on the 6506Without restarting the box or disturbing any services can we c...
why does a router prefers a EBGP over IBGP ( i am aware that AD of EBGP is less than IBGP)regardsNeo
This is probably a stupid question, but I am going to ask anyway.If I enable pruning on a switch, compared to just adding the allowed VLANS on the trunk, is there a difference?What would be the best way for the traffic to get to only the switch desir...
Im tryig to get layer2 qos to work on a 4900 for non IP traffic. Ive have set tx-queues to shape at 5mb on my egress interface but this doesnt seem to working correctly, Could anyone point me in the rigth direction to achieving shaping all traffic ou...
What would the impact be to servers that have a trunk running to them when/if I enable VTP Pruning?I have a number of ESX Boxes with VMs on various VLANs... what would happen? Thanks.
Hiit's possible to use Alias in IOS.example:alias ====> IOS CMDsave ====> copy run star
I am in the midst of designing a network that will have Oracle RAC in it. I am using Dell M1000 chassis and I am good to go on the front end production design with Cisco 3130G's blade switches ethernchanneled back to a redundant 6513 core.However, f...
Hello Everyone,Need your input on the following:I have an existing 4510 with dual sup configuration (active/standby) sso mode. We will be adding another 4510 as a redundant chassis. I am planning on implementing HSRP, and configure it both switches...
Hey all,I'm a CCNA without any real world experience. I'm trying to find a WIC for a 2801 that has at least one gigabit interface (fibre). I've been digging around for half an hour online, and most of what I find is HWICs, which it looks like the 2...
Hi All,I am currently running cisco IOS and want to load fresh Cisco IOS. I connected the G1/2 into the TFTP server computer. The TFTP server interface is 10.0.0.2. I am unable to assign the ip address to the G1/2. how can I do the file tranfer from ...
Hi all. Kindly guide me in this since i dont know why its happening I have 3 routers connected via serial interfaces like this R1-------------R2-----------R3R1 IP = 11.0.0.1R2 IP(for R1) = 11.0.0.2R2 IP(for R3) = 10.0.0.2R3 IP = 10.0.0.3Now R2 is con...
Hi,I am new switching. i need to change name of a existing vlan. does it require a reload. please specify the commanfs
Hi, any adv that EIGRP is using two Administrative distances (90 and 170) where as OSPF is using only one Administrative Distance (110). any thoughtsregardsNeo
I was discussing an IS-IS question with Giuseppe on the WAN forum, and it raised a sharper question in my mind about the true meaning of "adjacency" in both IS-IS and OSPF networks. As the books tell us, on a broadcast network; OSPF routers form adj...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 04-23-2025 06:26 AM | ||
| 04-23-2025 06:18 AM | ||
| 04-19-2025 09:40 AM | ||
| 04-15-2025 04:52 AM | ||
| 04-11-2025 03:44 AM |
| User | Count |
|---|---|
| 9 | |
| 6 | |
| 6 | |
| 4 | |
| 3 |
