Switching

Can these two Cisco switch security features affectively prevent a host with a statically assigned IP address from accessing the network?Thanks

I am looking at implementing qos on our network for some ip surveilence cameras and also for streaming video from a quicktime server on mostly 2960 and 3560 switches. Can I use autoqos for this or am I better off creating MQC policies? If I use aut...

Hello All,I would like to understand the root cause for ignored packets , I have a 2811 router with 2 FE I'm seeing input erro /ignored packet count increasing on one FE which is connected to the service provider - 30 Mbps Ethernet circuit.As per...

I don't know where exactly to start from. So instead, i will jump right on to the question.Say you are being provided with 2 IP addresses, PC 1's IP address and PC 2's IP address, which are 17.4.4.2 and 14.2.3.2 respectively. You are required to fin...

Got a strong feeling that the lifespan of high end and chassis based Campus switches are longer then the switches that have fix port configurations.Unfortunately I can't find any document on cisco that supports this feeling.E.g. lifespan different be...

The server 10.6.22.10 I'm pinging resides on FastEthernet0/0is 10.6.1.1/16. If I send the ping from f0/0 I get reply -below is the output:Packet sent with a source address of 10.6.1.1!!!!!Success rate is 100 percent (5/5), round-trip min/avg/max = 1...

I'm trying to configure in a 877W a connection to a DSL. With the configuration below, I can ping from the router any Internet address but from any PC on the network I can't. Can somebody tell me what is wrong?no aaa new-model!!dot11 syslogno ip sour...

hi! we're given 2 range of ip to use 172.16.2.0/23 and 172.16.4.0/23. will there be any issue if i would to cut the 172.16.2.0/23 subnet into 1/2? eg. 172.16.2.0-172.16.2.254 and 172.16.3.0-172.16.3.254 (which is /24)?or172.16.2.x/23 and 172.16.3.0/2...

I need to send a technician to a decomissioned remote site with no wan connectivity to clear the configs on a Cisco 871 router and 2950 switch. Is there a button sequence to press to permanently clear the config without requiring console access? Th...

Hi Folks,I have a dilemma I need a little help. I have 2 3750 that I need to deploy as network Core/Distribution with 2 ASA's. I wanted to find out it will be more advantageous to stack the switch or do it the old fashioned way with HSRP with port ch...

Hi, is it VTP Transparent mode ?regardsNeo