Switching

Error was seen from CISCO6506.%PM_SCP-SP-2-LCP_FW_ERR_INFORM: Module 2 is experiencing the following error: Bus Asic #1 transient Pb error. Recovered. (0x0002, 0x0000) Module 2 is WS-X6148-GE-TXBut all ports and protocols are running well all the ti...

hi allcan anyone tell me what issues on a network duplicate ip addresses can cause?

Hi all, when moving packets on a network, what is best, lots of small packets, or less bigger packets ?

Hi I am experiencing a strange issue with the DHCP feature on the Cisco 3560 switch ( IOS 12.2(46) ). If we reboot the Cisco 3560 switch DHCP Option 176 ascii string will be get added to another double colon. Hence Avaya IP Phones fails to regist...

Hi all, can anyone tell me what things on a lan can stop DHCP from working between client and server?thanks

Is the "mac-address-table notification change" feature fully operational in 122-33.SXH4? I believe i have it set up correctly but have not seen any snmp traps generated.

Assuming Host A has packets to go to Host B in the following all-Ethernet connection:Host A --- Switch A --- Router A --- Router B --- Switch B --- Host BHost A and B are in different subnets, and their default gateways are Router A and Router B vlan...

Hi all,i have switch Cisco Internetwork Operating System SoftwareIOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA1, RELEASE SOFTWARE (fc1)Copyrigh...

In spanning-tree, Bridge ID includes the priority and the device' MAC address. For each VLAN on the switch, what MAC address is used here? A related question: "sh spanning-tree bridge" tells the MAC of the root bridge. How can I find out which switch...

If a client mode switch has higher vlan configuration revision number than the server switch in the VTP domain, will the server mode switch sync its vlan database to that of the client mode switch? or client still sync its vlan database to server's?M...

Is this accurate...If I have a switch (3560) with 48 - 10/100 Mbps ports and 1 - SFP Module (1000base-T) for the trunk..The throughput from one device to another on the switch is limited to 100 Mbps. The trunk line is limited to 1 Gbps. So if all 48 ...