Switching

Hi!I configured 1 VRF in a 7600. I need to send some packets from the global table to that VRF. I configured 2 ports, one in the global table and the other in the VRF and join the 2 ports with a crossover cable. To send the traffic to the VRF i used ...

R1---------------------------------R2-----------------------------------------R3---------------------------------------R410.10.10.1 /8 -- 10.10.10.2 /8 -- 172.172.172.2 /16 -- 172.172.172.3 /16 --192.168.1.3 /24 -- 192.168.1.4 /24R1 in AS 100R2,...

Hello,I am having problem with configuring OSPF default route(connection to internet) on subnets which are not connected to ASA. I have following setup:--internet-- ASA5505--Cisco Router---hostsASA5505:192.168.10.0/24Cisco1712:192.168.20.0/28I can pi...

Hello,I cannot find a great deal of documentation about exactly how the pathcost method operates.We have a 6509 connecting to a 4006 which in turn connects to several 3550's. The 6509 and the 4006 are in the same MST domain and the 4006/3550's are in...

1) Does 3750 only support X2 or Xenpak too?2) When using the dynamic configuration tool, it doesn't give me any option to choose 10GB gbics but in the description for WS-C3750E-48PD-EF, it lists it as Catalyst 3750E 48 10/100/1000 oE+2*10GE(X2),1150W...

Any have tips on what to check if a switch (3560) says the port has been granted power but the device does not come on? It also seems as though once a port says it is providing power it never removes it from the list (even after you unplug the devic...

Hi,I'm putting together a CCNA/CCNP lab and I have two 1720's with WIC-1DSU-T1 interface cards. Can I connect the two 1720's with the WIC-1DSU-T1 interfaces like you would with serial ports? Do I need an ethernet cable with any special pinouts? Thank...

I wanna know what features of cisco 3750 for detecting duplicate ip addresses.let's say I assign 5 IP addresses for my managers by using the dhcp server.If someone(internal users) try to set those ip addresses manually then how do I (prevent/detect) ...

On a Cisco 3825 router with HWIC-D-9ESW Receive the following error message after command auto qos voip trustRouter(config)#interface FastEthernet0/1/0Router(config-if)#auto qos voip trust%Error: FastEthernet0/1/0 Service Policy Configuration Failed....

Hi, I connected a 2950 to a 2924 and set the 2950 to VTP SERVER and the 2924 to VTP CLIENT but the 2924 won't learn the additional VLANs I created on the 2950. I even manually set the VTP DOMAIN on the 2924 to match the 2950 even though I thought ...

Hi.How can I to configure one port priority in my switch 2950 or 2960? (Without create QoS and vlans) I want that a specific port of switch send data first by uplink!Thanks

Hi,I own the spring 2006 edition of the cisco QRG.Does anybody know if there is a newer pdf version available?If yes it would be very fine if you could send me the link where I can download it.Regards,Thorsten

I like to know if these new switches can be connected to Pwr675.Anyone know that? Thanks a lot in advance. Graciela