Switching

I have a brand new switch WS-C2960G-48TC-L with ios "flash:c2960-lanbase-mz.122-25.SEE2/c2960-lanbase-mz.122-25.SEE2.bin"and when i configure vlan trunks with any other type of switches (2950,2960,2970) the port led on both switches changes continusl...

I have a 2851 router that has a 4-port fastethernet card and I need to connect a device into one of our fastethernet ports. but the does not see the device. Any advice?

We want to share an Internet-connection with a C2960 and limit the bandwith on each port (each customer on a port). I try the parameter "max-reserved-bandwidth" on an interface but there was no difference in bandwith on this port.Is there a way to li...

i have two 2811 with 4 t1s between them. (2 on each). I would like to connect the two f0/1 interfaces on each router to each other so if both t1s go down on one router the packets coming in f0/0 will just route out f0/1 to the other router that still...

I want to know if the Cat 2955C-12 come with a DC adapter . if is not the case what are the current and volts specifications.

I wanted to generate an excel chart of the time it takes to ping from one site to another site across my ipsec vpn. I was hoping to use the timestamp option with ping to get the time and then graph that in reference to the ms delay in the relay. i w...

I have a router 7513 when I make any change on the configuration I'm getting the following error:er-plcgua1#sh slavedisk1:%Error show slavedisk1: (Error Sending Request)er-plcgua1#wrBuilding configuration...% Cannot communicate boot variable to slave...

Is there an issue when traffic crosses a trunk link between two switches compared to a traffic between two ports in one switch? Traffic, for example is a shared folder in a Server where 100,000 images with each image worth about 64kb are being writte...

Hi Could some one suggest me that what does this mean if any interface show "output flow-control is on and output flow-control is not supported."

I recently RMAd a bad 3550-24-PWR switch and got a refurbished one in return. However, this one seems to be a little louder than the one I had. 1) Is there any particular reason for this?2) Is there a way to adjust the speed of the fan or is that aut...

Hello, I am attempting to move a DHCP scope from a Windows server directly to a 2621Xm router runing 12.2(23) IOS. Creating the scope itself is not the problem. The scope on the Windows server has two Novell options (option 78 & 79) for SLP. On th...

Hi,I am using two Cisco 6509 chasis acting as access/distribution switches. So I dual homed hosts connected to these switches. One NIC to each switch. Can I use HSRP between the two switches to provide fault tolerance when NIC1 is connected to one...

Is RSPAN supported on the following switch?C3550 Software (C3550-I9K2L2Q3-M), Version 12.1(22)EA5I'm having problems trying to configure a remote-span vlan on the switch above.

Hi all, what is the benifit of using these ? and do people still use them ?