TelePresence and Video Infrastructure

Is it possble to have CME in a site to site configuration?We're a small company of about 10 users at our HQ. We have multiple offices in Asia, ranging from 2 users to 15 users any location and we currently use Multitech VOIP and we are looking to mig...

We are having some trouble with SRST. When we call 911 from a site for example we are getting the address for our main building as well as our main building's number. This also appears to be the case at some other sites. Some sites are fine I beli...

Hi,I am very new to the video technology, so please bare with me if I am not making sense.We have an MGC 100, with an h323 card installed, and want our customers to be able to use the MGC 100 for video over IP.Our Customer base, have their network be...

Hi,Am i right to say that the path taken for voip is the same as data path? eg if i do a trace, that will be the path the voice will take...Now, i have 2 links (for redundancy) between 2 location (A and B). A->B takes path X while B->A takes path Y.....

Is it possible to proxy a call between two local zones on the same gatekeeper? Thanks for any replies.

Does anyone know where I can get the OID to monitor VoIP? Specifically I want graph the number of dropped calls we generate.Thanks, Steve

Im having an issue with the type of camera to use with my IPTV server. I have a JVC camera, but the problem is that i records on tape first then i have to replay for the IPTV server to capture. So i can do live streams with camera. But it works well ...

I was wondering if anyone could help? I have a Callmanager express system with 5 7960 phones and everything is working fine, This morning I tried to add a 7920 to the system and things started to go wrong. When the 7920 starts and registers with CME ...

I am trying to use the 7940 phone to make SIP TLS calls. The image on the is P0S3-06-0-0. All the documents I have seen seem to describe security feature in call manager context. Can any one point me to a document/URL or provide steps on how to confi...

Is there anyway to mix 323 and sccp video and if so, can someone show me a doc that explains how to configure with the MCU?

I have a Cisco PGW2200 & two Cisco AS5850s, which have PGW 2200 - DS0 Right-To-Use (RTU) Licenses for 5000 ports for PGW2200.Now I add two AS5850s.Question:1. I will buy PGW 2200 - DS0 Right-To-Use (RTU) Licenses 5000 ports for PGW2200 when we add tw...

Hi All,We have a scenario where a hub and spoke DMVPN network has been configured. All sites in the network access central corporate resources and the Internet through the hub site.We have almost unlimited bandwidth at the hub, but very limited bandw...

We are using Cisco 7960/7940 (without Call manager) Sip phones. How do you ajust the inter-digit timeout? For example, when someone dials a phone number they have to wait about 10 seconds before the phone places the call. I would like to shorten t...

Hi,Is there a network monitoring tool out there, that can monitor video endpoints (cisco, polycom etc), as well as monitoring LAN and WAN, cisco router and switches?Thanks