Has anybody gotten a USB Camera to work on the SX80 as a video input (CE9.7)? I can see the camera is detected by the Kernel in the logs, but I can't seem to get it to be detected as a video input. thanks
Hello. We are having issues connection to the DISA GVS Gatekeepers using the Roomkit Plus codec. The systems will not register with the gatekeeper and I want to make sure I'm not missing a specific setting, etc. This is for SIPR. Is there anyone fami...
I have noticed that my TMS SQL server is running out of disk space. Instead of just throwing more disk space at it, I decided to enable Purging in TMS to remove old data, but it doesn't seem to be doing anything.Under TMS Server Maintenance, I have e...
Join meeting not working working from Cisco Meeting app and webRTCDeployment is single Server Simplified Setup CMS version 2.5 CMS meeting app version 1.11.13hardware :CMS 1000
Dear All, After upgrading my DX80 to the latest software (CE9.10.0), the wireless remote I have been using to control the device stopped working. It would still work with CE9.9.1 though. I can see some difference in config options between two version...
Hai We are new to telepresence solutions and one of the client has Webex codec plus and precision 60 camera,crestron control what solution can we offer for conferencing from out side enterprise with soft clients.Can webex codec plus works with cloud...
Hi, Nowdays when we are trying to register our service contracts, Cisco want to know the serial number of the camera aswell. We usually don't write that down. Is there any way to get those serial numbers through Putty over Telnet or SSH?
Hallo,the camera automatic from the Cisco is turned off...and the call for the camera preset 1-8 is comming from ext. Controller but the camera pan/tilt/zoom function are very fast.Can we global adjustment the camera pan/tilt/ Zoom slower at the web ...
Hi, I have a cs-kit-s-unit that I want to use it in standalone mode, i set the default call protocol as H323, and in its setting I set the call setup mode as Direct and the Nat mode as ON and I specified the global IP address at the NAT address. The ...
Just looking for information on the WebEx Roomkits running in Standalone mode. Is this possible. I see posts about it, but need to find some documentation that shows it works on the device. We have a customer that has a mix of third party cloud devi...
DX80 Ce9.7.1CM version 11.5.1TMS 15.4.0 DX80 is registered on the CM and can make VTC call in and out. Problem: NTP status TMS error when adding it. Wrong Provisioning Mode How do I clear the wrong provisioning mode error. Its on the CM which cont...
Hey All, Has anyone got a good solution for alerting engineers when licenses get low on TMS? I was thinking of scripting something and pulling the number of remaining licenses from the DB but I'm not sure what table mu query should be targeting
