Hi all,I have an SX 20 with a shipped version " : (Shipped Version : TC7.0.2).After a long time of use, we did an upgrade to the "version : TC7.2.1". After this upgrade, we have found an error according to the license, and the system can...
Hi all,I have an SX 20 with a shipped version " : (Shipped Version : TC7.0.2).After a long time of use, we did an upgrade to the "version : TC7.2.1". After this upgrade, we have found an error according to the license, and the system can...
Dear All, We have two cucm Clusters in Different Locations between that clusters i createdInter-Cluster Trunk (Non-Gatekeeper Controlled) Now all are working fine Between Clustersaudio calls & Video calls between sccp 8945 phones , but...
Hi !I'm using the DVI-->HDMI connector to connect HDMI inputs on my MX300, is there a way to create an additional HDMI input so I can rotate between 2 sources ? perhaps any way to convert the output into an input ? Thanks! Gabby
Hi There !I'm trying to to use the MX300 with Apple TV and/or chromecast and am encountering the following problem:1) Chromecast, not detected on DVI Input2) Apple TV - Cannot play content due to HCDP error. Anyone have experience with this ? Thanks ...
Hi all,I have the follow situation:1. TMS Server in the DMZ2. VCS Control in DMZ, TMS agent replication Movi user with TMS3. VCS Expressway in the Public Internet4. MOVI User authenticate via Active Directory5. EX90 behind Firewall (Home User)7. EX90...
I have a CUCM-integrated C40 in a DMZ. It works great for internal calls to other phones on the system. However, when I try to dial an IP address, I get an almost immediate "call failed" and the firewall logs imply that it is actually trying to com...
Hi,I want to start a manual recording from end points during a conference call on MCU.For example 3-4 participants are on same MCU conference room and need to start recording this conference. Is this possible to start a recording from an enpoint duri...
Hi, We have around 7 CTS 3000 (Registered on CUCM) and 8 VC SX20 (Registered on VCS). Whenever we have a collaborative conference using CTMS while sharing the content flicker is observed on far end site. Irrespective of whoever is sharing, far end si...
Hi All Video Expert,I'm facing a problem the call out display id issue.(Domain: abc.com) TP endpoint H323 reg. (H323 address: 1184@abc.com with H323 ID: 1184) to VCS-C --- VCS-E >>>> Internet <<<< (Domain: xqyz.com) VCS-E --- VCS-C --- CUCM --- reg. ...
Is Cisco 9971 capable of doing video calls? If so, then how it would call any other party?
Good morning all,I am hoping someone can help with this. Sorry for the possibly simple issue here. But, I have a user I just built in Cisco TMS and they're unable to sign in. I've tried signing in as them on my own Jabber/Movi client and I still have...
I am implementing Telepresence Server 4.1. I am at the point of installing FEATURE license.I have the PAK code for the licenses. When I try and claim licenses, I am required to put in the VIRTUAL Serial number of the TS server.From GUI and from SHO...
I know i can do BE6K redundancy.how about TCS, TMS, and MCU??Is it possible to make redundacy on TCS, TMS, and MCU???
Hello,Is anyone familiar with resetting the admin password for this endpoint? I believe the process is to take note of the option and bandwidth keys then hold the speaker button on the front as the unit powers on? Thanks!!
We are struggleing to get our VCS and TMS talking again. Looking at various logs we have decided that there is a problem with the OpenDS component. Running a Diagnostic against the local agent seems to confirm this.If OpenDS is not...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
03-28-2024 08:12 AM | ||
03-27-2024 06:24 AM | ||
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 09:29 AM |