TelePresence and Video Infrastructure

Hi,I have installed Jabber Video for Telepresence 4.3 but while launching it throws error "New Feature in this version of Movi are not supported by your computer's graphics driver" Can anyone help me out here? Thanks,Vikash 

We have to install 3 cameras on C-60 codec........the arrangemnt is as followsFirst camera --- on HDMI portSecond camera ---- on HDMI portThird Camera  ------- on DVI port via DVI-HDMI convertorOn going to the camera settings option...........we are ...

Guys,We have a couple of T3s that we need to migrate to a different system. I have the T3 admin guide and I can see that you can change the gatekeeper address from the system menu. That I think is only for the center codec. What process do I need to ...

It is possible to make a call from a SX20 CUCM registered to an HDX8000 Polycom that is directly connected to Internet?

Is there a way to disable the Call History on the Touch 8 (attached to a c-series or ex-series unit)?What about the Call History in Jabber Video for Telepresence?I've a client that would like to do this, in order to discourage return calls in certain...

We have implementation of VCS control with VCS expressway within an internal leg of the Fortigate firewall with no dual NIC. We have NAT-ed virtual public IP for both inside the firewall. both VCS are in the same subnet (private IP and NAT-ed virtual...

Hi guys, We have a client reporting that he is receiving numerous fax calls every now and then, we got him to diver the call to a fax machine and trying to get the sending number and it is keep changing or sometimes come up with a dummy one like 1234...

Hello everyone, I got a quick question, how many input can C90 show at once during a call. I understand it can process up to 5. In short, Can i have the primary and secondary camera shown together during a call?? Thanks,Ken

 Hello,What is the best implementation for a SIP trunk between a VCS control cluster and a CUCM cluster (1 Pub + 1 Sub)?Should we create 2 Sip trunks from CUCM publisher one to VCS control 1 and a second to VCS control 2. On on VCS control 1 (Master)...

Hi All, In my understanding the deployment guide does not clearly state that the Encryption key is a must, it simply states that "The TelePresence MCU has the ability to use a secure connection for communications."I don't have a valid service contrac...