TelePresence and Video Infrastructure

Hello all.I hope one of you can help me.I am running VCS X7.1The CUCM was running 8.5 and I had video calls working from VCS to Jabber for Windows.Then we upgraded CUCM to 9.1.Now, I can only answer the call on my 7945 (no video phone) and get voice ...

When accessing the codec C40 via the command line interface (telnet or ssh) as admin user, it accesses on maintenance mode by Cisco Telepresence Maintenance Mode as the attached file so i need to solve this issue.please advice  

Hey all,After a webcast the other day on the Cisco Learning Network in relation to Video Surveillance Monitoring which demoed LiveAction (by Actionpacked), we asked some question as to whether this product would be useful in monitoring a videoconfere...

Hi I'm bringing up a new TX9200 system and getting a "Telenet connection error" on the center camera. The other two check out OK and have verified all physical conenctions are correct (actually center camera shows Video and USB connections OK). Have ...

hi allI am interested in video over IP for online meeting but I have one main question which is,if there are free VoIP services like skype, then why I would to purchase cisco Telepresence system ?  thank you very much !

Greetings,Background:We have to migrate TMS to a new server because the old one is being retired. My first migration attempt failed, because (I later found out) the server we're migrating to is Windows 2008R2 64 bit which is not supported by our curr...

When accessing the codec C40 via the command line interface (telnet or ssh) as admin user, it accesses on maintenance mode by Cisco Telepresence Maintenance Mode as the attached file so i need to solve this issue.please advice 

We are looking to replace trusty old Polycomm and Tandberg units with a Telepresence C40.  On the old Polycomm and Tandberg units we can simply enter the endpoint IP and connect.This C40 unit was attached to a CUCM and worked through their Gatekeeper...

Hi all,I have just finished watching one of the Cisco Press "Meet the Aouther" webinar WRT regard "QoS in Campus Networks" (and last week QoS Design Best Practices and Strategies) and along with this Cisco document (http://www.cisco.com/c/en/us/td/do...

Hi, is there a way to start presentation from cts endpoint remotely by CLI or GUI?  thanks Alex