Unified Computing System Discussions

Hi everyone,someone knows exactly how is the Access VLAN Port Count calculated? And, If I have the feature failover enabled in the vNICs, could it increase the total in some way? Thanks so much Regards,Roberto

I've been looking all over net for help on this one but I can't seem to find anything.  We just recently upgraded our UCS Chassis, FI's and Blades from 2.0(1q) to 2.1(1e) and we're receiving an error message on all our provisioned VLAN's.  The VLAN's...

I have UCSC-C220-M3SBE server with vmware ESXi 5.1.0, 1065491 installed on the same in which CUCM subsciber running which got hing twice within a month. I keep on getting these messages everage after every 4 days or so from vsphere client. How to sto...

Greetings, Looking for best practices and any recommendations on utilizing the Cisco delivered VNIC drivers versus the native drivers included with SLES.  We are currently running firmware 2.2.3(e) on UCS B200 M4 blades running SLES 11.3.  The versio...

Hello! I couldn't find any Cisco document explaining this procedure. I have to do a replacement for the primary IOM in one chassis.  does anyone know how to replace a IO Module 2104XP on a UCS Chassic? From the UCSM, there's no option to decommessio...

The following condition is being reported on IOM 2 in one of my chassis.  This is the information from the General tab in the gui: Overall Status:  Fabric Conn Problem Configuration Error:  fabric port channel member link automatic activation blocked...

Hi All, I have a question about Cisco UCS Manager log. I'd like to know retention period of Audit Log, maximum log size and current size. (not mentioned anywhere on manual) Please Help me. Have a good day.

Good afternoon, forum. Does anyone know if it's possible to throttle the fans down on the subject server? I have one in my office and it's fairly loud. Many thanks!

Good evening, everyone. UCS newbie here. I have a standalone C210 M2 that emits the following beeps right after the "Configuring and testing platform hardware" portion of the POST sequence. Said beeps are all short, lasting about a second; high, low,...

Is there a detailed runbook for this process?  Or material that postdates the August 2015 material in the "Upgrading Cisco UCS Hardware" Chapter on moving between UCS 2.0 releases.The project is to first upgrade the client to a stable FW across all t...