Unified Computing System Discussions

I am running UCS emulator 3.0 with 4 gig of ram and 2 cpus.When I open UCS Emulator in firefox or  chrome the left hand menu shows up fine but the middle/left pane is blank, no launch buttons show up.I am running java 1.6.Any ideas?

High Experts, Please let me know which UCS rack server is best to accomodate both ESAv, WSAv and SMAv virtual appliances. Thanks & Regards,Rahil

While creating PEER link for a VPC  is it must to have peer switches  back to back connected or there can be a extended layer 2 connectivity over multiple layer 2 devices in between . If so is there any limitation on number of devices in between.

We have a UCS5108AC chassis with 2 2104XP I/O modules and 1 B200 M1 Server.  We recently purchased 2 UCSB-PSU-2500ACDV power supplies.  We are wanting to use the 110v capability off of the new power supplies.  My question is will this work.  The only...

I've got C220 M4 server with two 1Gb Intel LOM adapters which I configured for iSCSI boot. I got boot from SAN working but only on one adapter at the time, secondary adapter is not active and stays that way even if I shut down the primary adapter. Is...

Hi, I hope somebody can help me with this. I've had this server powered down for about two months and it was working fine. I powered it on to install VMware ESXi 5.5 or 6. When I checked the RAID controller there were not any virtual drives created w...

Hi all,I tried to configure my UCS System with a Service Profile template.I Use iscsi boot, so I Need to configure a UcsVnicIScsiStaticTargetIf via CiscoUCSPS.It took me a Long time to find out the Syntax with try and error and the | convertto-ucscmd...

Hi all, just completed an upgrade from firmware 2.0.2q to 2.2.5b (with an intermediate stop at 2.1.3g) on management, fabrics and blades.  The blades are running vsphere esxi 5.5.  Prior to the upgrade, if I told vsphere to shut down, i.e. shutdown a...

I have a question on the process that the HUU does when a C series FW is updated. I have done a few of them and each one does it so far. I get done with the upgrade, hit exit, and the server goes trhough what I think would be a graceful restart. Duri...

Hello, Is it possible to create and configure a RAID device from the CIMC XML API?  I have found various examples for other parts but not RAID configuration. I want to be sure this is possible before I spend to much time trying it. 

Is anyone actually using UCS Central in a production environment? As a whole it is buggy and has lots of quirks.. If you are using in a production environment can you give details on how many UCSM are connected to it? Thanks in advance. 

Hello all,I am having a very difficult time trying to figure out a way to enable some sort of hardware monitoring on older generation Cisco Integrated Management Controller Express systems.Here's what we're running:Product (FRU) Number: C3900-SPE100/...

Hello EveryoneSo i have been trying to get Windows NLB using IGMP with multicasting to work on our 6200 series fabric interconnects.  I can get everything setup but cannot ping from outside the NLB subnet.   Our upstream environment is an L3 3850 sta...