Unified Computing System Discussions

In the process of having our VMware host boot devices live on SD card internal to blades vs. on SAN.  In making the change I've been made aware of the following policies I need to create/modify:Local DiskSrubBootMy plan is to update our template, whi...

Hi,I know this error used to be common a while back, but I'm running 2.0(2q) with four apparently healthy PSUs per chassis in n+1 mode and consuming using less than 800 watts across four B200 M2 blades. Help?Thanks,Hamish

Hello everyone,          I would like to know if third Party server such as Dell,IBM can connect to FI?Thanks & Best Regards,

Hi Team, Pls help in understanding Post routing and Pre Routing in IPCCE 

Hi,How can i check the user login session and kvm session in UCS manager,And also i want the details of who and which users currently login in the ucs server. I was checked in the CIMC tab  sessions but nothing is there i mean history of user login i...

I have configured LDAP authentication through Microsoft Active Directory for the UCSM system. It's been working well. I went to configure LDAPs for secure authentication with my LDAP servers today and I received the pop up message: "Warning: Port 636...

Hi!Did any one run into UCSM font display is too small on Windows 8 , 10 inch tablet?  Is there anyway to change the font in the UCSM?

We have a Cisco C240 M3S server that we have imported into our UCS Management Software. We have some PCIe cards that can run warm under load, and due to this we had changed the 'PowerPolicy/FanPolicy' to High Power, which dropped the temps a good 10C...

Hi,i have configured vm-fex on ucs manager 2.2 with VIC 1240 and it is working fine,but when i check in vcenter i can found only 1 physical adapter is in use and  second is still connected to vswitch0, can anybody please help me what i missed in my c...

Is it possible to connect the same pair of Fabric Interconnects to two(2) different Datacenter Switches and restrict  a subset of our B-series blades to only use the new datacenter switches while the remaining blades would continue to use the current...

Greetings UCS Community.  Somewhat new to UCS system and have had to do extensive troubleshooting to get our Fibre Channel SAN talking to our FIs.  I was wondering if our 6248 FIs support the use of FCPING or FCTRACE to the upstream FC switch we conn...

When we install Windows Server 2012 R2 Update (specifically using Windows Server 2012 R2 Update 1 ISO), mouse and keyboard does not respond after server is installed. Is it a known issue or is there specific firmware or UCS version requirement to sup...

Hi Team: I am on the UCS Firmware upgrade Process, and I am getting the following error: fsmFailExtvmmProviderConfig Fault Code:F999919 Message [FSM:FAILED]: sam:dme:ExtvmmProviderConfig Explanation None set. Fault Details Does Anyone has gotten a si...