We received a replacement for a failed server that did not include memory, processor.... I need installation instructions that I can send to the Tech for the transfer. The site is in the Ivory Coast Afrcia.
short version: Does UCS-CPU-GREASE2= have a red cap or a blue cap on the syringe?long version:We got some UCS-CPU-E5-2620= cpu's to install in our UCS C220 M3 servers. The pre applied thermal compound on one of the heatsinks was smudged so we need to...
I am getting and error hen trying to add a ucs hot into a vmfex dvsitchvDS operation failed on host xxxxx, An error occurred during host configuration. got (vim.fault.PlatformConfigFault) exceptionany idea why? Its trying to installing the vem via up...
i am seeing a very strange issue when installing windows 2012 r2 on my M4 blade pls see attached screenshot. the error message i see is "the amount of free space on the selected partition is smaller than the 541032 MB recommendation" has anyone seen ...
It is possible to gather typical cpu, memory, fan speed, and hdd utilization statistics from the Cisco MIBs for UCS B / C series servers? The excellent Cisco UCS Monitoring Resource Handbook (https://communities.cisco.com/docs/DOC-37197) provides a l...
Hi,We need help .We have UCS setup it has about 4 chassis and 19 blade.I need to get CPU ,memory utilization of each blade.How can we get it.Also I need to get network bandwidth of each blade .Please help me.Thanks,Victor
Hi,I configured Etherchannel for C200-M2 and CIMC shared LOM with the redundancy mode,-active-active mode, when Etherchannel two switch ports UP, not reachable CIMC but okay ESXi and VMs. CIMC reachable if shutdown one of switch ports.-active-standby...
hi am having issues getting my cisco UCS servers to san boot off of my EMC VMAX storage array the UCS chassis connects to a pair of Brocade 5100 FC switches which in turn connect to the VMAX the WWNs of the UCS server are visible on the brocades, but...
I have a VIC 1225T card, which by definition has 2x 10 GbE copper ports. What sfp's am I supposed to use in the fabric interconnects that support 10GbE over copper?
I've currently got an opportunity to upgrade a C220M3 UCS server from the standard Intel 1G LOM's to 10G and I'm looking at various ways to achieve this. This is for a standalone UCS server running VMware.At the present time in this environment ther...
Hi everybody, I am confuse with the vNic and vHBA template setting in UCSM. Could anyone help me ? From vNic template, we can define the Fabric ID and pin group. If I define a pin group which is go to Fabric B, and choose the fabric A in v...
HI,I am thinking of using C220M4 in standalone mode. I have been reading about adapter-fex and I am wondering which Cisco VIC supports adapter-fex and which Nexus Switch will support adapter-fex. I am thinking of using a VIC1225 and Nexus 3000. Thank...
Hi,I have the a chassis, that included the B200 M1 M2 M3 .... I want to promote the maximum hardware specification ....Would you mind help to verify the maximum specification as below: (Actually, I cannot search the B200 M1 datasheet to talk about th...
Dear UCS communityI hope you have seen this announcement:New Cisco UCS Power Calculator and Estimation Tool. It features an all new User Interface (UI) and is currently live at http://ucspowercalc.cisco.com
Hello,We need to upgrade memory for one of B200 M3 servers. It is fully equipped with 24x 16GB 1600 RDIMMs. We need to have 512GB of RAM, so we have to replace old DIMMs with 16x 32GB ones. Now, I have a question which DIMMs are better since the pric...
