Unified Computing System Discussions

Where can I find Cisco UCS C-Series Rack-Mount UCS-Managed Server Software Drivers, e.g. W2012 R2ISO image of UCS-related drivers  ucs-cxxx-drivers.1.4.5b.iso 13-JUN-2012 1908.21 MB Is shown as most recent ????http://software.cisco.com/download/relea...

I still can't find W2012 R2 on the support matrix http://www.cisco.com/en/US/docs/unified_computing/ucs/interoperability/matrix/r_hcl_B_rel2.13.pdf

Hello,Im trying to configure VM-FEX on our UCS infrastructure. I have updated all UCS components to version 2.1(3a). Our VmWare is in verision 5.1.0 and we have Enterprise Plus feature set. I have studied several documentations about setting VM-FEX, ...

Hello,I try to build virtual Portchannels on 2 Nexus 5548UP and 2 UCS 6248FI. With standalone links (without vPC) the communication between some ESX-Server and my Network is working. When I build vPCs on the N5k the vPC all portchannels (on N5K and F...

Any best practise how to clone UCS domains ? I have to setup 5 UCS domains, with of course domain specific IP addresses, resource pools ?xml Backup and then modify in editor is rather inconvenient ?Is show configuration a more appropriate way ?Any su...

Hi,Has anybody set up a C200M3 server with the VIC 1225 installed and configured an etherchannel to a pair of Catalyst 4500x?The server is freshly installed with ESXi 5.1, standard vSwitch and two vNics active/active and LB set to IP Hash.As soon as ...

Hi guys,For Hyper-v is it possible to access the iSCSI data lun through the same vNIC thats used for boot luns?I have a hyper-v host boot from IP SAN through two vNIC ( iSCSI-A and iSCSI-B) with vlan 20 and 21 respectively. Now I need the hyper-v hos...

Hello allcan someone help me?I have to boot my B200 M3 from my SD Flex Card 16 GB from CiscoI made the following settings-Servers\Policies\root\local Disc Config Policy  --> Flex Flash State = Enable + Mode = No Local Storage or Any Configuration (bo...

There are two VSMs and four VEMs on ESXi 5.1 servers.They are all the same version,Release 4.2(1)SV2(1.1a).I want to add two two ESXi 5.5 servers.Can I just install Release 4.2(1)SV2(2.1a) on two ESXi 5.5 server,then add two VEMs with release 4.2(1)S...

Are the Teradici PCoIP Hardware Accelerator cards supported on a C240-M3 ?