Unified Computing System Discussions

Hi,We are currently testing a new infrastructure and are having this issue:On one ucs when we disable a FI server uplink to simulate a network failure, the underlying ESX host keep the Vnic connection live and does not fail over ot the other connecti...

Dear All,We have a setup of UCS C240 M3 servers connected to two 6248UP FIs.We have installed Nvdia Grid VGX K2 cards in C240 servers and when we goto server>adapters in UCSM we only see the VIC card (VIC 1225).VGX card is installed in PcIE slot 5 an...

what would be the version to upgrade to. should I go 2.1(3a) or (2.0(5e)?

Hi,I have associate a SP to a blade.If the physcial blade failed, could I configurate the SP in order that automatically the SP should be  associated with another free blade ?If YES, how I have to configurate the SP or SP template ?Thx for your feedb...

I know that with 2.1.2a, we introduced minimal support of SD-card, e.g. installing and booting ESXi.What about internal USB ? I think this is still not supported ? correct ?

Hello,I installed ROM55 embedded RAID upgrade option and RAID 5 support with an optional software key on ucs c220 m3 server.I enabled the Embedded RAID Controller in the BIOS by the following steps.step 1 boot the server and press F2 when prompted to...

Servers within our existing v2.0(3c) UCS pod  need new connectivity to a layer 2 network in our datacenter. This network is not accessible to the Juniper switches northbound of our current 6248 fabric interconnects. After reading the docs, it appears...

Hello everyone...I was wondering what is the rationale behind the fact, that when you gracefully shutdown a baremetal host running on UCS B-series, we get major faults raised, as the vNICs and vHBAs are down (which is expected...).See the attached fi...