Unified Computing System Discussions

Hi,i'm installing Solaris 10 update 9 on UCS B-Series (B230 M2 or B440 M2) with M72KR-Q Adapter. We create the Service Profile with vNIC associated to vNIC Template. The vNIC Template use the MAC Pool Address configurated.When we run ifconfig -a on S...

Hello,I have the following configuration and I suspect that there is a loop, but will need someone to verify.We  have (2) HP C7000 Enclosures with each enclousure  has (2) Flex-10  Modules and each Flex-10 module has (2) 10Gb LACP connected to Cisco ...

We have two B200m blades that we have installed with Windows 2008 R2 and need to determine if the current driver set available for the MK81R/MK82R for Windows 2008 R2 supports VLAN tagging from inside of Windows.  If anyone could point me in the righ...

Hi All,We are having issues getting our fabric interconnects to sync time with our internal time source.  We have a pair of the 6248UP's and a pair of the 6120XP's both running the 2.0.1s code, both show the same issue..   We have set our time source...

Hi,I'm trying to install Cisco SRE-V software on CISCO-2911-UCSE/K9 but failed.Here messages-yourname#SERVIce-module sm1/0 status Service Module is Cisco SM1/0Service Module supports session via TTY line 67Service Module is trying to recover from err...

We have an existing UCS infrastructre where all  the FI's FC ports are connected to the MDS9513 as one to one connection ( no port channel or trunking) and the FI is working as "end host mode" . We are planning to move some crtical production applica...

Hello again,To this url : http://www.cisco.com/en/US/partner/docs/unified_computing/ucs/sw/cli/config/guide/2.0/b_UCSM_CLI_Configuration_Guide_2_0_chapter_01.html#concept_A998786BEF9D4ED99FCBFA638E47128BI could read :"If You Opt Out of Multi-TenancyT...

Hi to all,I configured VXLAN configuration by the book (Cisco Nexus 1000V VXLAN Configuration Guide, Release 4.2(1)SV1(5.1)), but there is some problem.There are two ESXs with four VMs (two VMs on each ESX). Each VM has one NIC and that NIC is assign...

Hi,configured and installed SRE-V on SRE-900 in a C3945Elike following.interface SM1/0 description Console-Interface to Service Module running ESXi ip address 10.10.91.12 255.255.255.0 standby 191 ip 10.10.91.1 standby 191 priority 230 standby 191 pr...